Comma Multipurpose Grease is a lithium based grease of number 2 (medium) consistency with good temperature tolerance. In comparison, mineral oils are more prone to thickening at low temperatures and volatilizing at higher temperatures. Developed to provide superior protection to electrical contacts under the most difficult conditions. At a higher temperature, the pressure will decrease according to the pressure utilisation rate as per DIN 73378. ready to have your mind expanded by the possibilities and taste a bit of the future before everyone else.

Grease 2212 for Plastics Rubber Seals 50ml Clear Silicone Grease 2212 for Plastics Rubber Seals

However, the fact remains that plastic gears are essential components in many commercial and industrial facilities. As experience teaches, there are not too high pressure rates within the bounds of an automatic centralised lubrication system and the mechanical strains for plastic tube PA 12HL can be classified here as rather small. There is a wide variety of thickeners used in lubricants including PTFE, Bentonite, aluminum, and amorphous silica among others. Registered Company Address: Unit 2 Genesis Business Park, Albert Drive, Sheerwater, Woking, Surrey, GU21 5RW, United Kingdom.

Grease is merely an oil treated with a thickener, giving it a viscosity that is much higher than oil. Conversely, a grease with good corrosion protection may not be appropriate for low friction applications. Polyalphaolefins (PAO) are commonly used in automotive applications as they can retain their lubricating properties even at extremely high and low temperatures. When evaluating these tests, be sure they reflect your worst possible conditions because both lubricants and plastic materials are more prone to change in high temperatures and adverse environments, particularly with high dynamic loads.

Grease Traps and Grease Interceptors for Restaurants and Grease Traps and Grease Interceptors for Restaurants and

Most plastic gears can run without lubrication; however, using the right lubrication can increase life expectancy and prevent cracks. The material is inappropriate for the following chemicals: concentrated mineral acids, concentrated acetic acid, phenols, cresols, chlorinated hydrocarbons, acetone, and ketones. Higher loads would need oils with higher viscosity oils to sustain a lubricant film from start to top; on the other hand, lighter loads require lower viscosity oils to prevent drag. Their main purpose is to reduce the friction between moving parts, thus allowing them to perform more consistently and greatly reduce both wear and tear and power consumption. Special Plastics Compatible Grease is an efficient mechanical lubricant for plastics both with themselves and with metals.The Data User shall refrain from copying and disseminating the data or the database as a whole and / or from causing such acts to be carried out by third parties, without TecDoc's prior consent. Hi there, regarding Vaseline your article says, “Vaseline or petroleum jelly is compatible with plastics but won’t give ideal results. Our plastic nylon tube is used with lubrication systems from the progressive distributor to the lubrication point or from the re-lubrication distributor or piston distributor to the lubrication point. A "forgotten" reinforcing socket (plug-in sleeve) upon mounting may cause severe problems and damages.