CAUTION – Incompatible products: Certain products contain power supplies or circuits that are not compatible with an inverter using a modified sine wave output (such as this inverter) and may be damaged by using this inverter.

The second stage is a MOSFET bridge stage that converts the high voltage DC into 120 volts, 60 Hz AC. Connect the free end of the fuse or breaker wire to the positive (+) terminal of the DC power source (battery). Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness.The fault icon and the USB icon will light solid and the bars on the Battery Icon represent the voltage level of the connected power source. To turn off the inverter first, choose the bypass option using the bypass switch located on the back of the inverter.

A. Disconnect the USB-powered device and press the power button again to turn off the unit immediately. Induction motors, as well as some TVs, may require two to six times their rated wattage to start up. Your inverter is engineered to have standard electrical and electronic equipment directly connected to it in the manner described in the “Installation” section of this Instruction Manual. It's one of the most versatile inverters on the market today, plugging directly into your vehicle battery to deliver full power to multiple devices through (3) USB ports and (2) 120 Volt AC outlets.Refer to “Power and Fault Indicators on the LCD Display” for an explanation of the icons that indicate a fault condition before shutdown. Follow these instructions and those published by battery manufacturer and the manufacturer of any equipment you intend to use with this unit. A. Disconnect all appliances from the unit and press the power button again to turn off the unit immediately. Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 20.

Because these inverters have a peak watt power rating, many such appliances and tools may be safely operated. However, in some instances, some interference may still be visible, especially when the TV signal is weak.For cable lengths exceeding 10 feet from inverter to battery, contact manufacturer for additional information. The product might exhibit unusual operation (such as, intermittent operation, buzzing, and the like. most AC loads, including linear and switching power supplies used in electronic equipment, transformers, and small motors. Mastercard, World Mastercard and World Elite are registered trademarks, and the circles design is a trademark of Mastercard International Incorporated. loads (such as TVs and stereos) require more current to operate than do resistive loads of the same wattage rating.

SAFE – Do not locate inverters in an area, room or compartment where explosives or flammable fumes might be present, such as engine rooms, engine compartments, and boats or small, unvented battery compartments. A beep will sound, the backlit LCD and the USB power/fault indicators will activate to indicate the inverter is operating properly and the 120 volt AC outlets are ready to power appliances that draw up to 1000W continuous and USB outlets up to 3. Ensure there is adequate ventilation around the unit and that the load is no more than 1000 watts for continuous operation. Then, on the front side of the inverter, you will find the on/off button, press and hold that button until the inverter is switched off.

With the LCD screen you can keep a close eye on your battery's real-time status, including power consumption, battery levels and any fault issues.