The Polar Blaster is a foam cannon that can be attached to domestic pressure washes to enhance the foam levels and user experience of the three products in the Autoglym Polar range. It fixes to the lance and comes with a bottle reservoir that contains the dilute product, negating the need to place a fill pipe in the product bottle. We’ve tested foams, but what about the cannons? We gathered nine to find the one to turn every car white. How we tested them As mentioned above, most users will apply their snow foam through a specific lance attachment for their pressure washer. These aren’t always universal, so make sure you choose one that’s compatible with yours. They usually have a bottle into which you’ll pour the snow foam concentrate. And depending on the size of your car, this may need to be refilled several times. Apply the snow foam generously to the entire car, including wheels, tires, and any heavily soiled areas . Polar Blaster is a unique foam gun designed to work in harmony with all Polar Series products, providing the speediest way to safely pre-wash, wash and protect your vehicle.

\n\t\t\tAutoglym Polar Blaster Snow Foamer

I used it for the first time Today and decided to try it during the Pre-Wash Stage, I made the correct 1:5 Ratio Autoglym Polar Blast Snow Foam to Warm Water and expected similar amounts of Clingy Foam to what I have been getting in the past with other Products/Lances but this was not the case. Polar Blast has been primarily formulated as a new pre-wash product. By using it in advance of your regular Autoglym shampoo you will loosen heavy soiling and contaminants and begin to dissolve traffic film. This will significantly reduce the risk of contamination scratching your paintwork when you agitate the shampoo foam with a sponge or wash mitt. Use your pressure washer to rinse off the snow foam, starting from the top and working your way down.

The only plus point for me was when I decided to use the Polar Blaster at the LSP Stage for applying Polar Seal, It did that fine but as this Lance is Marketed as a do-it-all product I expected much better to be honest. Just as clay bars emerged from the professional world into mainstream car care, snow foam is now part of just about every maker’s range, and a lance to lay it on is equally important. To rate the snow foam lances within our roundup, we based our recommendations on testing, our experience using multiple lances, the latest research and several factors. Some of the factors that we took into consideration included the lance’s build quality (bottle and connectors), adjustability, ease of use, size, compatibility, warranty and value for money. Best Snow Foam Lance Overview This is Autoglym's heavy duty pre-cleaner, and it doesn’t take much time with it to see why it already has an impressive reputation. In terms of ease of use and outright cleaning power alone, it's hard to choose between this and the pricier Bilt-Hamber's Touch-Less. The Polar Blast's greater dilution ratio offsets its smaller bottle, so you’ll get a good number of washes from it. It doesn’t smell too great, though, with a definite chemical aroma.

The fan blades do not have the same range of opening/closing compared to the PA gun, however it's probably by design and not an issue for me. The blades in the closer together position matches what I would use on the PA gun, any closer and it would interrupt how the output fans out (remember it's the orifice that does the foaming, not the blades). Regardless, it looks like you can modify it to cause the blades to come closer together.

I bought the Kit last Week and upon opening noticed that the bottle although it has recommended Ratio's written on it doesn't have any proper measurements in Millimetres which means measuring out the Product/Water Ratio's in another Container first and then transferring it into the Polar Blaster Bottle afterword's. Dilute the product at the recommended rate, outlined on the sidewall of the Polar reservoir bottle (D).Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide. Build Quality: Opt for a lance made from durable materials, such as brass or stainless steel, for longevity. No. The Polar Blaster has been developed for use with pressure washers only, a hose will not have the required pressure or the right connector. Use high-quality microfiber towels or a chamois to dry your car's surface to prevent water spots and streaks. Firstly the Top Dial which adjusts the PH does nothing at all until its nearly fully turned there is virtually no adjustment, Its pretty much either On or Off. Even on Full it is not giving anywhere near the levels of Foam I would expect and is only leaving a Thin, Soapy film on the Car.

In summary the product has been developed to work neat through to 1part Polar Blast to 10 parts water. We have been very happy with the product performance diluted at 1:5. Using snow foam is our favourite way of pre-washing your car. Not only does it look like your car has been hit by a blizzard, but it also helps to lift away embedded bits of dirt that regular shampoo sometimes struggles to lift (think bird poo, tree sap and overspray). You don’t even need a particularly powerful pressure washer, a budget pressure washer will still be good enough.

Karcher Ultra Foam Cleaner

Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products. Use the maximum foam setting when using the Polar products. However, it is possible to rinse the Polar Blaster through between uses by turning the foaming adjustment off. Polar Blast is a snow foam that can be applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo if the vehicle isn't heavily soiled, just ensure you rinse the vehicle with water first to remove the top layer of dirt. If you haven’t used snow foam before, we’ve written an in-depth guide that covers exactly how to use them. As most function in a similar fashion, this guide can be used regardless of the lance you buy.