Aidapt Easy Fit Slatted Bed Transfer Rail Design to Help Getting In and Out of Bed

£9.9
FREE Shipping

Aidapt Easy Fit Slatted Bed Transfer Rail Design to Help Getting In and Out of Bed

Aidapt Easy Fit Slatted Bed Transfer Rail Design to Help Getting In and Out of Bed

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

As a general guide there are two options for wall mounted rails by the toilet. If you have the same strength on both sides of your body it may be a good idea to have supports fixed on both sides of the toilet so that you can use both arms. This should be a flat, unknotted piece of wood, which is screwed into the vertical joining pieces of the partitions. The grab rails can then be attached to the board. The College of Occupational Therapists recommends a 144mm x 19mm board/pattress with its external corners well rounded and the board itself fixed to the wall at least every 900mm (COT 2006). This Solo Bed Lever is specifically designed for use on slatted beds with a lip. Incredibly easy to fit, simply slide the base of the lever underneath the mattress and against the lip of the bed. The Solo Bed Lever once fitted is extremely stable and helps to assist with transfers both into and out of bed. The rail can also help users move from a lying to a sitting position whilst in bed or just as an aid to repositioning themselves and finding the most comfortable position. Its large hand grip sits above the bed and can be easily grasped even by those with limited hand strength. Grab rails by the toilet are often fixed to the wall alongside the toilet, but if this is not possible (due to the toilet being too far from the wall or a partition wall or a radiator being in the way for example), then a drop down rail that extends from the wall behind the toilet could be used (see below).

A high contrast finish may be helpful if you have low vision - choose grab rails in a colour that contrasts with the wall it is to be installed on. Toilet frames are designed to provide horizontal support for pushing up from a toilet, or for steadying the body when lowering onto a toilet. The frame, which stands over the top of the toilet, can either be free standing or fixed to the floor. These fix to the wall behind the taps and rest on the bath rims. When sitting in the bath, the rail will be directly in front of the person at about chest height. In this position it will provide stability whilst in the bath. The rail should only have downward pressure applied so the weight is taken by the bath rim, it is not designed for the user to pull on to sit down or stand up from the base of the bath (Pain et al 2003). Feel confident getting in and out of bed every day with the NRS 2 in 1 Bed Rail. Suitable for divans with a solid base or framed beds with fixed slats, the rail provides you with great, stable support and its slim base design has a minimal impact when it slides under your mattress. Our Bed Lever is a safe and stable handhold to help the elderly, disabled, or anyone with physical limitations or injury to get in and out of bed with less effort.If you fail to return any VAT exemption forms to us we WILL charge your card for the outstanding VAT. Consider the advice about the different kinds of grab rails. Identify the best types of rail for your particular requirements. If you have underfloor heating, or if you have a sealed/waterproof floor, such as in a wetroom, you should avoid fixing rails into the floor. You must also consider where any services, such as water/drainage pipes and electricity cables run inside the walls or under the floor. There are many types of grab rail. The main types are briefly introduced below, before going into greater detail about grab rails and their use in specific areas of the home.

Every time you use your bed lever, make sure it's fitted firmly between the bed base and mattress and there are no gaps between the upright part of the lever and the mattress.Our Bed lever is designed to help keep you safe, and our easy to follow installation guide ensures positioning is correct. Part of the rail can be fixed at an angle of 13° upwards towards the head end of the bath to provide an inclined support. as you sit and lift your legs into bed. As with all OTS Bed Grab Rails, the Bariatric versions are manufactured to meet all the latest safety standards.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop