When it says it can go over rust, are we talking clean metal, with light pitting which may hold rust, or rubbed down, but visibly rusty metal? Tested extensively by us in development stages, our products come out on top in testing and reviews, across the range. models of the classic Aladdin blue flame heaters all had the same tubular wick carrier (the Blue flame 16, 27, 32, and 37). The unicorn poop wick carrier still needs a little more hammer and dolly work to straighten out some irregularities in it's shape, and that could also use a touch with the MIG to fix a less critical popped spot weld, I'm also far from happy with the finish on the lid, but apart from that it's not too far off.

Even sitting in the garage and sanding stuff for more than half an hour makes me ache from my ankles to my lower back these days, and today I stupidly kept doing half an hour until the pain built up to "Scream out loud" levels, then back into the house to lay down, take another painkiller, and whimper for a bit.That detector actually has an LCD meter built in, so I watched the level climb from 0ppm to 3ppm throughout the day, and then it stay there. Does anyone else over the age of 45 get a vague feeling of "Wrongness" about mixing metric and imperial fasteners on one machine/tool/device? Our Double Speed-Wax has won the “best wax and sealant” award in the Auto-Express magazine product awards for the last 4 years, winning 5 years in total. There is nothing you can turn rust into that is going to react badly in a fire and frankly, if that stuff leaves a coating, that will probably just burn off anyway. Our Deox range of rust removers are capable of removing heavy rust, yet remain safe to use with no danger to skin or the environment.

Yeah, I'm fixing it up to use, in case we DO get these rolling power cuts the government's been hinting at ! Due to the many types of paint formulations and curing processes test compatibility of products at small scale before use. As Hydrate 80 will activate on clean steel the affected area should be cleaned beyond the visibly corroded surface, this will ensure complete treatment.In that photo, the pot on top was just me seeing how long it took to boil a litre of water (18 minutes in that thermally sub optimal shaped cafetiere if you're curious), and the disc of 10mm steel was just to see how hot a (non chimney blocking) lid would get, then it stayed there as a sort of heat spreader.