When it comes to color, it is worth mentioning that the prints are not too dark. One buyer said that his models are fine in terms of quality but he would like to get a bit darker gray for more noticeable details. It’s a matter of personal preference. Lastly, when you need to print big models which use up a lot of expensive resin, you want to use conservative 3D printing settings. Do whatever you can to lower the risk of failure, even if printing takes a bit more time. Remember, failure will cost you way more – it will cost time and resin to reprint the whole model. Lift height is the distance the build plate moves up between layers to separate the printed model from the FEP. What Lift Height should you use? Be careful; some slicers measure this setting in mm/s, while others mm/min. So, for example, 1 mm/s would convert to 60 mm/min.

The high fluidity of this resin results in better printing accuracy and reduced curing time. By adding polyurethane acrylate (PUA) to the formula, the manufacturer has increased its bending strength and tensile to make this resin tougher.

5. Phrozen ABS-Like Matte Gray Resin

Do you 3D print pre-supported miniatures? Usually, supports are very thin on these. As a result, you might not have much choice but to increase exposure and print slowly or add a few additional supports. It’s also worth mentioning that the wash station lid has a basket for you to place your print. Not all wash stations offer this feature, but it’s necessary if you want the best wash possible because you never want to touch the soft part with your skin. If your normal layer exposure is around 7 s, then the burn-in layer exposure should be around 70–80 s. The calibration part on the left was printed with shorter 1.2s exposure. We have all vertical and horizontal gaps open. Tiny windows on buildings are all open and well defined. We have four rows of pins and a little bit wobbly antenna tower. The chess pattern is also pretty good; however, it indicates some under-cure as the corners do not meet perfectly. One user said that it prints well with crisp detail thanks to the great properties. It would be perfect for miniatures, particularly for detailed prints.

Retract speed is the speed at which the build plate lowers down into the VAT. What Retract Speed should you use? We go over more in detail why these two post-processing techniques are necessary. Washing Source: Youtube Uncle Jessy Lift speed is the speed at which the build plate rises from the bottom to the top after each layer’s exposure. This speed also defines the speed at which the model is peeled off the FEP. What Lift Speed should you use? Minus the one tinted window that lets you watch your model cure, almost the entire inside of the casing is reflective. This means all of the UV light cast from the light strip on the side is bounced around the container to hit every part of your to-be-cured model.

A great comment that a reviewer made was towards Elegoo’s support, saying that you can’t beat it. He had an issue and Elegoo reached out to him to give a replacement. So in the rare case that you have issues, they will cover you. One user who 3D prints miniatures did mention that the results are great but the models can still be brittle if you drop them on the floor from a table. I’d recommend adding in some flexible resin to provide durability to your models.

The 1.2s exposure setting might be great for prints that need sharper negative details and clear surface textures. Also, those that do not have many positive features like standing hair. But these settings might not be that great for bigger, heavier models supported with thin supports. Make sure they are also clear unless you want to change the color. This can make your printed parts more durable and tougher, so they won’t break or get damaged for many years to come.Store the printer parts in dust-free cabinets. Dust can harm the filament and the printer parts. Experts recommend storing the printer parts in dust-free cabinets or cabinets with ventilation. Of course, there are a few control tools, including two knobs/buttons for setting the timer and controlling the heater inside the machine. You don’t need the second feature, but it’s always better to use warm water/solvent liquid than cold. Another advantage of this ABS-like resin is its versatility. It can be used to print a wide range of objects, from toys and figurines to functional parts and prototypes. One user who has used it for mechanical parts said that he loves the crisp detail and strength of the prints. Here’s a comprehensive guide to help you to understand key resin 3D printing settings. After reading this, you’ll be ready to face the rewarding world of 3D printing.

According to the manufacturer, this resin is thermosetting and the deformation temp goes from 60 to 80℃. One user recommends adjusting printer settings to somewhat higher values so that the minimum room temperature is 24℃. Moreover, even though your resin printer already solidified the resin during the printing process, it isn’t solid enough right off the print bed. A curing machine spins your model around while it’s exposed to UV light, which really hardens the soft resin material. How Long Does it Take to Cure Your 3D Print? Exposure time depends on the reactivity of the resin, but also some other factors. For example, room temperature impacts resin curing speed significantly. The warmer resin will cure faster, while the colder ambient temperature will slow down the curing speed. That means that you might need to use longer exposures in winter. As we have mentioned several times in this article, you have to adjust your resin 3D printing settings based on what you want to print. You also have to take into consideration several other factors. SupportsSome people recommend increasing the number of bottom layers to increase adhesion to the build plate. That is not true. In fact, in perfect conditions, 1 bottom layer is more than enough to cure the model to the build plate. However, we recommend having 2–⁠6 bottom layers for these reasons: SUNLU has created this ABS-like resin with durability, high precision, and low shrinkage in mind. It comes with an improved formulation that allows for high-precision work with minimum shrinkage. The tensile strength is from 20 to 35MPa.