VirtualLink is a proposal that allows the power, video, and data required to drive virtual reality headsets to be delivered over a single USB-C cable. Find sources: "DisplayPort"– news · newspapers · books · scholar · JSTOR ( April 2022) ( Learn how and when to remove this template message) High-resolution displays and multiple displays with a single connection, via a hub or daisy-chaining [68]

Connect the other end of the DVI cables to the DVI port on your computer tower. This port is what connects directly to your computer’s video card. Be sure that this connection is tight. The tables below describe the refresh frequencies that can be achieved with each transmission mode. In general, maximum refresh frequency is determined by the transmission mode (RBR, HBR, HBR2, HBR3, UHBR 10, UHBR 13.5, or UHBR 20). These transmission modes were introduced to the DisplayPort standard as follows: However, in 2013 VESA announced that after investigating reports of malfunctioning DisplayPort devices, it had discovered that a large number of non-certified vendors were manufacturing their DisplayPort cables with the DP_PWR pin connected: Kowaliski, Cyril (4 May 2006). "DisplayPort 1.0 approved by VESA". www.techreport.com. The Tech Report . Retrieved 1 May 2018. Three 10K ( 10240 × 4320) displays @ 60 Hz and 10 bpc (30 bit/px, HDR) RGB/Y′C BC R 4:4:4 color (with DSC)The Mini DisplayPort connector was developed by Apple for use in their computer products. It was first announced in October 2008 for use in the new MacBooks and Cinema Display. In 2009, VESA adopted it as an official standard, and in 2010 the specification was merged into the main DisplayPort standard with the release of DisplayPort 1.2. Apple freely licenses the specification to VESA. However, transmission mode support is not necessarily dictated by a device's claimed "DisplayPort version number". For example, older versions of the DisplayPort Marketing Guidelines allowed a device to be labeled as "DisplayPort 1.2" if it supported the MST feature, even if it didn't support the HBR2 transmission mode. [47] :9 Newer versions of the guidelines have removed this clause, and currently (as of the June 2018 revision) there are no guidelines on the usage of DisplayPort version numbers in products. [48] DisplayPort "version numbers" are therefore not a reliable indication of what transmission speeds a device can support. VESA Releases DisplayPort 1.3 Standard: 50% More Bandwidth, New Features". www.anandtech.com . Retrieved 7 January 2016. DisplayPort has historically had higher bandwidth than the HDMI standard available at the same time. The only exception is from HDMI 2.1 (2017) having higher transmission bandwidth @48 Gbit/s than DisplayPort 1.3 (2014) @32.4 Gbit/s. DisplayPort 2.0 (2019) retook transmission bandwidth superiority @80.0 Gbit/s.

Three QHD ( 2560 × 1440) @ 120 Hz and 8 bpc (24 bit/px, SDR) RGB/Y′C BC R 4:4:4 color (uncompressed) Joseph D. Cornwall (15 January 2014). "DisplayPort in A/V Applications in the Next Five Years". connectorsupplier.com . Retrieved 10 May 2018. FAQ for HDMI 2.0". HDMI. Archived from the original on 5 January 2019 . Retrieved 29 November 2013. DisplayPort 1.0 includes optional DPCP (DisplayPort Content Protection) from Philips, which uses 128-bit AES encryption. It also features full authentication and session key establishment. Each encryption session is independent, and it has an independent revocation system. This portion of the standard is licensed separately. It also adds the ability to verify the proximity of the receiver and transmitter, a technique intended to ensure users are not bypassing the content protection system to send data out to distant, unauthorized users. [8] :§6 a b Pins 13 and 14 may either be directly connected to ground or connected to ground through a pulldown device.In version 2.1, VESA introduced the DP40 and DP80 cable certification tiers, which validate cables for UHBR10 and UHBR20 speeds respectively.