The Bullet Magnet is one of the most common magnetic separators found in installations handling free-flowing dry bulk materials such as grain, flour and seeds. Bullet Magnet is an efficient device for removing large pieces of iron from pipelines system, which is widely used in the process of flour, mill, grain, plastics, kaolin, and French chalk.

Easy-Clean Bullet Magnet - Greenwood Magnetics

An Eriez Model ‘T’ Magnetic Trap has been installed at Ahlstrom Corporation, a global leader in the development, manufacturing and marketing of high performance fibre based materials. Eriez Magnetics Europe Ltd introduces the revolutionary ProSort II Airless Metal Recovery System which helps reduce landfill, re-use metals and save energy. Rare Earth Roll Separators – A simple pulley and belt system for the optimum separation of paramagnetic particles from dry products.

In 1969, Eriez Magnetics was the first company to patent both permanent magnetic and electromagnetic Eddy Current Separators (ECS). Food, sanitary, and USDA finishes available to fit your production safety regulations. Ideal for applications in the Plastics, Recycling, Powder & Bulk, Grain & Milling and Food Industries Get a Custom Quote Eriez Magnetics Europe Ltd has given three young men from the local community mechanical and electrical apprenticeships. The fantastic opportunity will not only enable the new starters to gain a new set of skills and experience working life, but will also help develop a new generation at Eriez. High Intensity Magnetic Filters - A high intensity, high gradient magnetic separator to capture fine ferrous and paramagnetic particles in liquids and slurries. This filter is widely used in the minerals and ceramics industry to purify the product.

Bullet Magnet - Leading Magnetic Equipment, Industrial Magnet Bullet Magnet - Leading Magnetic Equipment, Industrial Magnet

Pneumatic in-line magnets are built for use in dilute phase pneumatic conveying systems. They can be installed easily with optional factory-supplied compression couplings, and work best in horizontal runs with the plate magnet down to take advantage of material stratification. Pneumatic in-line magnets feature full-flow architecture to allow an unobstructed product stream.The Inkjet Marker MK II is an accessory for adding to an existing Metal Detector system, used to mark the location of metal contamination detected on a conveyor belt. Glenn joins Eriez Europe with extensive design, R&D and manufacturing experience, gained in the mining, plastic and engineering industries.

Magnetic Assembly Supplier | Stanford Magnets Large Complex Magnetic Assembly Supplier | Stanford Magnets

Mike Thomas has been appointed to the position of Procurement and Materials Manager at Eriez Magnetics Europe Ltd. The permanent suspended overband magnet is a magnetic separator that is well-established within the Eriez portfolio. In operation, dry granular materials or powders are fed, under gravity, into the top of the Bullet Magnet. The material strikes the centrally-mounted cone, around which it then flows close to the surface of the magnet. Any ferrous metal contamination is attracted to one of the magnet’s poles and held securely. During scheduled maintenance, on a frequency determined by the level of ferrous metal contamination, the Bullet Magnet is opened and the captured ferrous metal is manually cleaned from the surface of the magnet. ModelsEriez Magnetics Europe Ltd will be present at RWM 2014, (16th - 18th September), at the NEC, Birmingham, to demonstrate new developments with its range of eddy current separators. This advanced equipment will enable waste processors to achieve an extremely high level separation of non-ferrous material from waste material fines. Bunting’s in-line magnets offer effective, high strength magnetic separation that is easy to install and integrate with your existing systems. Bunting’s design has no maintenance required aside from cleaning the ferrous metal contamination it captures. The design of Bunting’s in-line magnetic separation equipment features full-flow architecture that leaves the product stream unobstructed. In-line magnets are suitable for a diverse range of industries, including food, grain and milling, powder and bulk, plastics, and recycling. Request a Free Quote for Customized Units

Spout Magnet / Bullet Magnet Manufacturer, Supplier and Spout Magnet / Bullet Magnet Manufacturer, Supplier and

Eriez Magnetics have enhanced their recently launched ProGrade Magnet range with the addition of Bullet Magnets. As product flows past the powerful magnetic bullet (up to 12000 gauss), ferrous particles as small as 30 microns and tiny paramagnetic particles such as stainless steel scrapings are filtered out. These very fine ferrous and stainless steel particles are smaller than can be detected with a metal detector.

Salient Features :

PokerSort – Eriez’ new PokerSort extracts long, troublesome pokers like automotive leaf springs, tie rods, steering and axle components and other generally uncooperative long shapes directly from shredded material. Gareth Canham has been appointed to the position of Buyer at Eriez Magnetics, World authority in advanced technology for Magnetic, Vibratory, Sampling and Inspection applications. Gareth joins Eriez with over 35 years experience in various Engineering and Purchasing roles which will bring a unique depth of experience and knowledge to this position. Eriez Europe has provided a one-stop custom solution to St. Margarets Metal Recycling and Transfer Centre Ltd. Eriez Magnetics Europe received the category nomination in the MRW National Recycling Awards following expansion of their Recycling Division this year with 3 new product launches.