SMPTE 292M, SMPTE 259M, SMPTE 296M, SMPTE 372M, SMPTE 425M, SMPTE 2081, ITU-R BT.656 and ITU-R BT.601. SDI Metadata Support

HDMI 2.0a supports Deep Color and HDR. Automatically configures to connected display. HDMI Resolution DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI Digital Video Interface (DVI) Standards That said you would need power to feed the MBA, a usb-c to display cable and the ultra studio over TB3. Fantastic news, thanks! I have the Caldigit TS4 hub (amazing but expensive), so this will work well.Channels unbalanced. Analog outputs 3 and 4 can switch to AES/EBU outputs for audio 3 & 4 and 5 & 6 output. This provides a total of 6 AES/EBU output audio channels when using this feature. SDI Audio Inputs SMPTE 259M, SMPTE 274M, SMPTE 292M, SMPTE 296M SMPTE 372M, SMPTE 424M, SMPTE 425M, SMPTE 2036-1, SMPTE 2048-1, SMPTE 2081-10, SMPTE 2081-11, SMPTE 2081-12, SMPTE 2082-10, SMPTE 2082-11, SMPTE 2082-12 and SMPTEST2108‑1 SDI Metadata Support PCI Express card for simultaneous capture of four different HDMI sources in any combination of SD, HD, Ultra HD, 4K and computer formats So you would probably need a powered TB hub like the OWC 4-port TB hub. But I’ve never used them with a MBA. But the arrangement works smoothly on a M1 Mac mini and MBP M1. DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI*, 4Kp48 DCI*, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI

It’s basically a dedicated data stream fed into the ultra studio and displayed on the grading monitor. Channels of professional balanced analog audio via XLR connectors. Optical Fiber Inputs/Outputs (Optional) and of course, that shows the kernel module is loaded, but for completeness I can also see that directly: PCIe capture card with 4 HDMI inputs for capturing up to 4 different SD, HD, Ultra HD and 4K formats at the same time The outcome of all of the above is that I cannot get Desktop Video to detect the Ultrastudio Express when launched. It displays the following message...bit RGB 4:4:4 in all modes up to 4Kp30 DCI and 8, 10-bit YUV 4:2:2 and 4:2:0 in all modes. 8‑bit RGB 4:4:4 in all DVImodes.

Built in, high quality hardware down converter outputs Ultra HD to HD with down converted signal on SDI outputs C & D and HDMI output when connected to an HD only TV. HD to SD Down Conversion SMPTE259M, SMPTE274M, SMPTE292M, SMPTE296M, SMPTE372M, SMPTE424M, SMPTE425M, SMPTE2036‑1, SMPTE2048‑1, SMPTE2081‑10, SMPTE2081‑11, SMPTE2081‑12, SMPTE2082‑10, SMPTE2082‑11, SMPTE2082‑12 andSMPTEST2108‑1 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI , 2Kp59.94 DCI, 2Kp60 DCI, 2Kp95.90 DCI, 2Kp96 DCI, 2Kp100 DCI, 2Kp119.88 DCI, 2Kp120 DCI Eventuell ist die Warnung bzgl. der Firmware-Version kritisch. Ein weiterer Hinweis, dass es sich hier um B-Ware handeln könnte. Vielleicht hat da jemand etwas geflashed (es gab zu dem Zeitpunkt eine aktuellere Beta-Software, aber nur für Mac). Jedenfalls habe ich die Karte nicht zum Laufen bekommen. Versuche, auf die Videoquellen zuzugreifen schlugen fehl, OBS blieb im Startvorgang hängen und hat sich irgendwann mit einem Segmentation Fault verabschiedet. DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI, 4Kp95.90 DCI, 4Kp96 DCI, 4Kp100 DCI, 4Kp119.88 DCI, 4Kp120 DCIThe last piece of oddity is that every time I boot this machine, it now prompts me with a graphical box to update the software. I say yes, it spends a few minutes showing a progress bar, says it's complete, and I should shut down, which I do, and then it prompts me all over again.