OMPHOBBY M1 RC Helicopter for Adults, Dual Brushless Motors Mini Helicopters Direct-Drive 3D Remote Control Aircraft-BNF (OMP Protocol Purple)

£149.5
FREE Shipping

OMPHOBBY M1 RC Helicopter for Adults, Dual Brushless Motors Mini Helicopters Direct-Drive 3D Remote Control Aircraft-BNF (OMP Protocol Purple)

OMPHOBBY M1 RC Helicopter for Adults, Dual Brushless Motors Mini Helicopters Direct-Drive 3D Remote Control Aircraft-BNF (OMP Protocol Purple)

RRP: £299.00
Price: £149.5
£149.5 FREE Shipping

In stock

We accept the following payment methods

Description

The OMPHobby M1 EVO RC Helicopter is the latest revision of the M1 helicopter. It has an updated carbon fibre frame and available in 4 new colours. The OMP M1 EVO RC helicopter is the latest OMP Hobby helicopter design, and successor to the popular M1. It is a good idea to remove the main and tail blades of the helicopter to prevent any injury if motors start accidentally.

OMPHobby M2 EVO and M1 EVO OMP comes with built-in receiver that supports OMP Protocol. In OMP Protocol, the throttle curve is fixed in the helicopter and cannot be adjusted at the Transmitter Radio. OMP protocl supports telemetry for Helicopter battery voltage. Normal, Idle-up1 and Idle-up2 flight modes are assigned by a switch on the Radio transmitter. Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle. The OMP M1 EVO comes as a BNF “bind and fly” helicopter kit, which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here).

For OMP Protocol, there are no pitch curves on the Radio Transmitter as pitch curves are fixed inside the Helicopter. For other protocols, the below curves are used. Curve

The OMPHobby M1 is compatible with the Radiomaster 4in1 series of radios (Both Types - OMPHobby Protocol & SFHSS) SFHSS/DSM/OMP: Removed PCs curve from pitch mix so pitch doesn't change when switching to stability mode. Note that R-XSR receiver supports 2 modes on SBUS out pin (SBUS mode and CPPM mode). This pin should be in SBUS mode to work with M1/M2 helicopter. The blue LED is turned ON for SBUS mode and OFF for CPPM mode. Press the bind button for 4 seconds to switch between the two modes. For OMP Protocol, there are no throttle curves on the Radio Transmitter as throttle curve is fixed inside the Helicopter. For other protocols, the below curves are used. CurveIncluded accessories: Charge lead, nut wrench, screwdriver, 1mm hex wrench, spare screws & servo arms. The OMPHobby M1 RC Helicopter is the original high quality RC helicopter with 290mm blade diameter weighing in at only 118g. The M1 features dual brushless motors along side a powerful onboard flight controller that supports three flight modes - altitude stabilisation, soft 3D and aggressive 3D. The OMPHobby M1 RC Helicopter is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well. If you are using OpenTX we recommend that you upgrade your TX16S to EdgeTX. EdgeTX model configuration files Configuration File Scroll to Source and press the scroll wheel button. Then scroll till you find your desired switch. Press the scroll wheel button to confirm. Throttle curves

R/C helicopters, including The OMPHOBBYM1 are not toys. R/C helicopters utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read the manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating all OMPHOBBY products. This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here). M1 is a high-quality product developed by OMPHOBBY for helicopter enthusiasts. Its compact size makes it flexible for either indoor flight or outdoor violent flight.Usage Warning:Please note that this is not a toy and should not be used by a child without suitable adult supervision due to the high speed prop which might cause injury. The product includes a LiPo battery which will require safe handling/charging and should be regularly topped up when the model is not in use. ** FUT/DSM: Change normal mode throttle curve to 0,5,5,5,5. We want governor to be engaged throughout except full negative. You can customize the model configuration as per your linking. Please refer to explanation of different settings. Switch Assignment The helicopter supports one one SBUS port. You can connect a SBUS compatible receiver to this port. It will override the internal OMP receiver. e.g. OSHM2055 S-FHSS micro receiver The OMPHobby M1 RC Helicopter BnF is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop