Brush, dip, roller or spray in suitable conditions. (When used outdoors make sure weather conditions are dry and still). Barrettine Wood Protective Treatment is also perfect for treating for many outdoor treated timber structures like sheds, summerhouse and gazebos. The treatment seals wood to give excellent water repellency and is oil based for deeper penetration. For use on bare wood which will be over-coated, for example with Barrettine Log Cabin Treatment or opaque paint, or physically protected from the elements. Compatible with many products both water- and solvent-based. Compatibility with any additional coating should always be confirmed by a test patch. Barrettine wood protective treatment is Oil/solvent based for deeper penetration. Low odour ready to use formulation. Superb quality water repellent resins. UV fade resistant colour pigments. High level, long lasting protection. For unpreserved / untreated timber we recommend using Barrettine Universal. Product features:

For added protection against mould, algae and wood boring insects, pre-treat garden wood with Barrettine Universal Preservative or Barrettine Premier Wood Preserver for a similar colour range SPRAY APPLICATION: Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions) Application: - by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still).

1 Litre

What is the difference between Barrettine Wood Preserver, Wood Protective Treatment and Universal Preserver? Areas that have been affected by mould, algae or fungi should be treated with Barrettine Mould and Mildew Cleaner prior to application Barrettine Premier Wood Preserver is a high-quality, low odour, oil based wood preserver that is deep penetrating. Barrettine wood preserver is used for wood protection against wood-destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. This wood preserver provides a semi-transparent matt/satin finish allowing the natural wood texture to be visible, it can be used on pressure-treated wood, treated timber or untreated wood. This high-quality wood treatment is suitable for rough, sawn or smooth timber, does not require over sealing for wood protection. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists. Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required). Barrettine’s Wood Protective Treatmentis a wood sealer for rough, sawn or smooth timber. It contains water-repellent resins that help reduce decay, swelling, and twisting of wood. Its pigments have good UV fade resistance and will help protect the wood from UV damage.

Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions)Ensure that surfaces to be treated are clean, dry and free from surface dirt, debris, mould, algae and other surface contaminates. New or Bare Timber We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations Apply by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still). Areas affected by mould, algae or fungi should be cleaned with a stiff brush or scraper then treated with Barrettine Mould and Mildew Cleaner