Many of the items we sell will come with the full manufacturer's guarantee. SMU, Ex Display and production products are covered under these conditions. All in all, this will be a great companion to go with one of the mitts lower down in this roundup, or just for use during those adventures at pace. Full Specifications Does anyone actually wear these garments for climbing?If so, why? Where, and in what conditions do you use them? These gloves are definitely ski and snowboard focussed but they should make for a very capable winter hillwalking option.

Fully adjustable and removable pile lined helmet compatible hood with three point adjustment and wired peak It essentially comes in two parts. There’s the outer Pertex Shield waterproof shell, then there’s a removable inner liner (the insulation). This liner includes a divider for your index finger which adds some points for overall dexterity. Overall, however, the the high-loft fleece lining does still make this mitt a lot less dexterous than a glove. That’s generally a given though. I’ve been using both the Guide Long and Short for the past year or so as my go-to glove. Once the leather has been broken in, the glove gives an extremely comfortable fit, with just about enough dexterity and warmth to allow you to do just about anything with minimal issues. Full Specifications I too normally used to walk in wearing a base layer when using the montane. However I found that sometimes you needed a fleece and others a hard shell, by the time you have this lot in your bag there is not a lot of room for anything else.

About Outdoorkit

The Pamir features a single layer, windproof Polartec construction, with light insulation throughout. This light recipe does come at a trade off, however, with minimal protection around the whole glove – don’t expect this one to be suitable for winter climbing, rather, think trail running or fast hiking.

My last comment may leave you about being drenched in sweat. Don’t be. The fleece lining doesn’t hold moisture and excess will soon run off. Even if some rain gets through the Pertex shell it will soon shed. Now with the hard shell system I use, I also don't walk in wearing the shell. I carry one standard weight fleece one very light fleece (as well as a base layer). That way my bag is fairly light and unbulky wrt the clothing in it and I have a good choice of clothes to wear during the day depending on the conditions. If you’re unsure then I’d err on the side of caution and go for a slightly warmer glove than you imagine. There’s nothing worse than a numb pair of hands halfway through your day.

Eco Products

We do not offer to reimburse postage costs if an item doesn't fit / you don't like it / change of mind etc. The cuffs have a snug fit which is perfect if you’re wearing mitts as they slide over the cuff with ease. Nothing more annoying than having your sleeves bunching up! Using Buffalo for about 40 years. Very unrestrictive compared to hardshells and layers IMHO. Have Big Face Mountain Shirt (zips waist to armpits) and for winter HA Salopettes (full length leg zips). The two way zips give instant good ventilation without removing layers....I've worn the salopettes on very hot days with the legs completely unzipped and flapping. Crutch strap on shirt a with high salopettes underneath keep core warm. I often don't use in optimal way next to skin as use thermal vest to avoid frequent washing and renewal of Fabsil treatment. It has touchscreen usability built into the finger and thumb and a generally dexterous and light feeling meaning that phones can easily be held and used.

It’s also worth bearing in mind that the amount of insulation required depends on the activity you’re buying the glove for. For example, a winter climbing or ski touring glove will need slightly less insulation than that of a walking glove. A glove that will be specifically used when sitting on belay ledges on the north face of the Ben will require a fair bit of insulation.In short, gloves tend to offer more dexterity, but less insulation, whilst mitts offer more insulation but less dexterity. Pile-Pertex is arguably the original non-wayerproof, but wear all day, single-layer soft shell system. The exterior Pertex shell is completely windproof and decently water resistant, while a deep pile lining adds effective insulation. Gore-Tex / Pittards Atacama Goat leather / further Pittards reinforcement / PrimaLoft Gold – 60g/m2. I also find that on windy days there is normally a lot of spin drift and constant bombarding with spindrift eventually makes the soft shell fail with me, then I end up damp and unhappy On non windy days if its dry then you really don't need a soft or hard shell and if its snowing then again I'd end up damp in a soft shell. So for me there were rarely conditions when having a soft shell was beneficial. I do sometimes carry a hardshell (ME Kongur) if the forecast looks particularly abysmal, but I know if I put it on my Buffalo will soon be saturated underneath it so would use to only for being static in a downpour.

The glove feels very light and nimble, with a supple goat’s leather palm that has been further reinforced with quality leather from Pittards (a leather supplier that’s been around for 200 years) around the thumb to survive constant use with climbing tools. If you do sweat out, the pile liner dries super fast anyway, but of course it’s uncomfortable and you’re losing fluid and electrolytes too, never a good call on a hard mountain day. I’ve gone through heaps of gloves following my time spent crashing around the mountains. Almost all the failures have involved the palm or fingers wearing or splitting apart. This makes sense, of course. The palm takes the brunt of the wear whilst out in the mountains, so it always helps to have gloves that have a high quality leather – or something equally durable – in that area as well as clever stitching methods to avoid the seams splitting open. Because the adjusters are small. Trying to adjust them whilst wearing heavy mitts is frustrating work. This is another design feature I’d change.

Accessories

Gloves have individual fingers that allow you to move each finger separately. Mittens usually only have a separate thumb (although there are some on the market with a separate index finger that gives you increased warmth with decreased mobility. Faults deemed to have been caused by misuse or improper care (including washing not in accordance with the product wash care instructions) are not covered by the guarantee. Opening up the main zip helps too. Our top tip is to team the Extreme with a Brynje of Norway mesh base layer which, like a string vest, gives super effective cooling when exposed.