DRY: Let dry overnight (approximately 8-12 hours—may be longer in low humidity). For 2-4 hour dry time, mix small batches of Seam Grip with Cotol-240™plus. Apply with brush. Apply just enough Seam Grip to cover the hole and spread ca. 6 mm beyond. Allow to dry (cure) level overnight. For 2-4 hour cure time, mix Seam Grip with Cotol-240™plus before applying. (fig. 4) Durable: Tough urethane adhesive bonds permanently to surfaces and dries as a clear rubber that’s weather-resistant You can color Aquasure FD using ceramic pigment found at most craft stores. Just mix it directly into the Aquasure FD. Once cured Aquasure FD is inert.

Aquasure may also be applied to high wear areas such as neoprene knee and elbow sections to help protect against abrasion. AQUABOND Super High Strength Two Part Adhesive in a handy sized 250ml tin complete with a 10ml bottle of accelerator. Ideal for bonding most rubber, nylon & Hypalon type fabrics and Wet and Dry Suit seals, inflatable boats, etc. To be mixed thoroughly, in a 25 parts Adhesive to 1 part Accelerator formulation, the mixture should then be applied twice to each surface following the instructions provided. For a strong, durable & watertight bond, Toluene Free, intended for one time use by professionals during manufacturing processes and may be used personally when carrying out repairs to wetsuits and many other items. Designed for single use only, for frequent or intensive use in industrial applications where safety standards meet current legislation, please see our alternative products GLUE TP – Two Part Adhesive and GLUE AC – Two Part Accelerator, which are supplied individually and contain Toluene. Product Code(s): Aquasure SR is a patented, urethane-based adhesive designed for shoe repair and restoration. It rebuilds worn heel and toe areas, reattaches separated soles and creates durable toecaps. Aqua sure SR is safe for use on all types of footwear including boots, athletic shoes, climbing shoes, rollerblades and more. As an Aquasure adhesive it offers excellent adhesion, superior waterproofing and long lasting flexibility with minimal shrinkage. However, it is specifically formulated for footwear offering excellent abrasion resistance, protecting your shoe from scuffs and scratches. PREP: Clean seams on used material with isopropyl (rubbing) alcohol or McNett Cotol-240™plus Cleaner & Cure Accelerator. Aquasure+FD Flexible and Durable Urethane Repair Adhesive & Sealant, Gear Aid by McNett, the industry standard for maximum strength repairs to wetsuits, drysuits and all watersports products. The flexible adhesive with its safe and environmentally friendly toluene free urethane formula waterproofs, seals and also protects against abrasion. Hundreds of watersports and household uses.

Aquasure+FD Wetsuit Drysuit Adhesive Gear Aid by McNett Features

Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of water sports and household uses. For fast cure, use with Cotol-240™plus Cure Accelerator.

Safe for use on both natural and synthetic fabrics, including GORE-TEX, neoprene, Hypalon, urethane, and rubber. Aquasure is a high viscosity gel that cures to an extremely elastic, clear urethane rubber. Since it is a thermoset urethane, cured Aquasure is impervious to solvents or extremes of heat and cold (-40F to +400F). Use Aquasure® for repairing wader seams. Turn waders inside out and examine seams and fabric for gaps.Apply Aquasure® directly to the seam, extending over seam and on to fabric by 5 mm. Use brush to work Aquasure® under fabric folds and into stitching. Allow Aquasure® to cure for 8 to 12 hours. Aquasure FD is a maximum strength urethane-based repair adhesive ideal for making permanent repairs that cannot be broken down with solvents. Once cured, Aqua sure provides great abrasion resistance, so it is recommended on high-wear areas. It’s ideal for repairing rips, tears and holes in wet suits, dry suits, waders, water sports gear and more. Aquasure offers long-term durability well as excellent adhesion and waterproofing with minimal shrinkage. It is safe for use on natural and synthetic fabrics including GORE-TEX, neoprene, Nypalon, urethane, and rubber. Aqua sure requires 8-12 hours to fully cure. Use Aquasure® to repair felt soles. To repair peeling felt soles, clean and dry peeling area. Apply Aquasure® in gap and close. Can also be used to attach new felt soles. Use tape to hold repaired area closed overnight. Remove tape when fully cured.

Brand

For bivvie or umberella repairs, apply a patch over tear or hole on outside. Apply Aqusure® to tear on inside and 5 mm beyond the tear. For instant in field bivvie or umberella repairs use Aquasure® Instant Repair Kit (contains 7 g Aquasure® and 3x McNett Tenacious Tape™ patches). Apply one patch over tear or hole on outside. Apply Aqusure® to tear on inside and 5 mm beyond the tear. Cover with another patch. Bivvie or umberella can be used immediately. Patches can be removed in 2-3 days.

With Aquasure® by McNett® you can easily repair tears and rips in your favorite waders, bivvie and outdoor equipment. Aquasure is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going.unique formula is the industry standard for maximum bond strength, abrasion resistance, flexibility and waterproofing. Roughen and clean surfaces with rubbing alcohol. Apply Seam Grip to both surfaces. Allow to dry (cure) 15 minutes, then join (clamp or tape) surfaces together overnight.

Seam Grip will flake away naturally off your hands in a few days. You can help this process somewhat by washing your hands with soap and water and using a disposable shop rag to remove as much of the adhesive as possible. We do not recommend using any type of solvent on your skin. Note: For silicone-treated tent and tarp fabrics, such as Silnylon, use SilNet™ Silicone Seam Sealer and Sil Fix™ Adhesive (More info about silicone treatments here: https://mcnett.zendesk.com/entries/26550173-Silicone-Silnylon-and-Silicone-Treated-Tents-and-Fabrics). Aquasure also makes an ideal abrasion patch for high wear areas such as knees, seats and luggage bottoms. You can color Seam Grip using Ceramic pigment found at most craft stores. Just mix it directly into the Seam Grip.

Technical Product Details

Seam Grip, Freesole and Aquasure are moisture-cure adhesives. As soon as you pop the top on the tube and expose the adhesive to the moisture in the air, the countdown begins. Unfortunately, you are unable to stop the curing process, but you can slow it down by storing the adhesive in a dry environment like your freezer. We typically recommend storing as follows: