You may choose to restrict the collection or use of your personal information in the following ways: Regional regulations must be observed when deploying radio equipment. More info Power Input Power Method Ubiquiti Networks Unifi UAP-AC-IW วันนี้! เปลี่ยนประสบการณ์การใช้งานอินเตอร์เน็ตของคุณให้ดียิ่งขึ้นด้วยอุปกรณ์ที่คุณคู่ควร! Looks like some of their APs are going EoL 1 March 2021, which means that any controller versions later than this will not allow you to configure the equipment.

The U6-Pro has the best 2.4 GHz performance, due to it being the only model tested with Wi-Fi 6 support. 5 GHz performance depends on a lot of factors, but the AC-HD, U6-LR and U6-Pro performed the best overall. I don’t have a reliable way to test multi-client performance yet, but they should also offer the most performance in multi-client tests and realistic use. IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended. PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.Unifi UAP-AC-IW คุณสามารถสั่งซื้อและติดตั้งได้อย่างง่ายดาย อย่าพลาดโอกาสที่จะเพิ่มประสิทธิภาพในการใช้งานอินเตอร์เน็ตไร้สายในพื้นที่ของคุณ I want to reach out and announce that we are starting the EOL lifecycle for the following models of UniFi AP:

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed. To test only the speed of the Wi-Fi connection between the client and the AP, my iPerf server was connected over gigabit Ethernet to my Switch Lite 8. I primarily used my dedicated pfSense box for this, but I also used my PC and laptop depending on what I was testing.We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen. PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC-IW-PRO itself requires 10W. I ran all of my tests with multiple TCP streams, and occasionally reversed the direction as a point of comparison. These tests ran for 60 seconds, so a typical client command would look like: iperf3 -c 172.25.10.5 -P 8 -R -t 60 An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE.

The Access Point AC In-Wall (UAP AC IW) is a dual-band, 802.11ac WiFi access point that can be plugged into any standard wall outlet. The UAP AC IW can reach a 1.1+ Gbps aggregate throughput rate with its 5 GHz and 2.4 GHz bands, and it has an impressively long transmission range up to 100 meters (328 feet). This access point is also equipped with (3) GbE RJ45 ports, including (1) for PoE input, (1) for 48V PoE output, and (1) dedicated to data transmission. The UAP AC IW is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app. Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support.

System Requirements

Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher) Ubiquiti Networks Unifi UAP-AC-IW! อุปกรณ์แอคเซสพอยต์ติดผนังแบบ 2x2 ที่ให้ประสบการณ์การใช้งาน Wi-Fi 802.11ac คุณภาพสูง มอบความสะดวกสบายให้คุณในการใช้งานอินเตอร์เน็ตทุกครั้ง The Ubiquiti UAP-AC-IW isa dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. GHz signals extend this circle out a bit, but with a few walls in the way, getting low SNR links and slow performance is likely. If there is clear line of sight AP range can extend much further, but every wall imposes a dBm penalty. Wall material and quantity are usually more important than distance in a home or small business network. Wi-Fi 802.11ac คุณสามารถเชื่อมต่ออุปกรณ์อิเล็กทรอนิกส์หลาย ๆ ตัวของคุณให้สามารถใช้งานอินเตอร์เน็ตไร้สายได้อย่างรวดเร็วและมีความน่าเชื่อถือ ไม่ว่าจะเป็นสมาร์ทโฟน, แท็บเล็ต, คอมพิวเตอร์โน้ตบุ๊ค หรืออุปกรณ์อื่น ๆ

Unifi UAP-AC-IW สร้างมาสำหรับการติดตั้งในผนัง ด้วยการออกแบบที่เหมาะสมกับการใช้งานในที่ต่าง ๆ ไม่ว่าจะเป็นห้องนอน, ห้องประชุม, ห้องพักโรงแรม หรือในสถานที่ทำงาน เปิดโอกาสให้คุณเชื่อมต่อไร้สายได้อย่างสะดวกสบายและมีประสิทธิภาพ Next, I switched over to my MacBook Pro and it’s 3 spatial stream Wi-Fi 5 radio. This is an interesting test because it shows the impact of an additional spatial stream, and removes the highest-end modulation (1024-QAM) and longer symbol duration of Wi-Fi 6. This is a more even playing field, and a chance for the 3x3 and 4x4 APs to show their strength.Ubiquiti's UniFi AP AC IW (In-Wall) Access Point transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The device features two additional Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network; both ports can be found on the base of the device.