All iPhone 4S models contain identical pentalobe screws to those found on the iPhone 4. The iPhone 5 has very similar 0.8mm pentalobe screws, but the screws have longer 3.6mm shafts. [11] Non-Apple manufacturers [ edit ]

Pentalobe screws reappeared in the mid-2012 version of the MacBook Pro. Eight 3mm and two 2.3mm pentalobe screws were used externally to attach the bottom plate of the case to the internal frame. [5] The late-2012 version of the 13-inch MacBook Pro was the first 13-inch model to have pentalobe screws; several were used externally in a similar fashion to the 15-inch mid-2012 MacBook Pro. [6] None of the three 17-inch models of the MacBook Pro have used any pentalobe screws. Pentalobe screw sizes include TS1 (0.8mm, used on every iPhone starting with the iPhone 4), TS4 (1.2mm, used on the MacBook Air and the MacBook Pro with Retina display), and TS5 (1.5mm, used on the 2009 MacBook Pro battery). The TS designation is ambiguous as it is also used for the Torq-set screw drive. Second, you’ll need patience. Pentalobe screws can be stubborn and difficult to remove. With the right tools and some perseverance, though, you can get the job done! The next step is optional ,but we highly recommend it nonetheless : get yourself some kind magnetic mat or surface where you can store all these tiny little screws!There are four holes on the bottom of your phone: two for the speakers and two for the microphone . The two speaker holes are located near the top corners of your phone , while the microphone holes are located near iphone 6s plus battery replacement uk . Sony used 5-point pentalobe screws (though mostly simply referred as 'star shaped' screws pre-dating the currently accepted name) on its Sony CLIÉ UX Series PDAs in 2003. These pentalobe, 5 point heads are not to be confused with Torx heads which have 6 points. A "IPR" designation identical to "PL" is sometimes seen due to the confusion. It is possible that ambiguous "TS" nomenclature is the same as the "PL" designation when referring to Pentalobe screws. While pentalobe screws may seem small and insignificant, they can actually be quite frustrating to deal with. That’s because they require a special screwdriver, which can be difficult to find. If those options don’t work, you may need to take your phone to a professional who can remove the screws for you. What Can I Use Instead of a Tiny Screwdriver?

If you need to remove a pentalobe screw, there are a few things you’ll need. First, you’ll need a pentalobe screwdriver. These are specialized tools that can be found at most hardware stores. MacBook Pro 13" Retina Display Late 2012 Teardown". Repair Guide. ifixit.com . Retrieved January 28, 2012. This can help loosen it up so you can get it out. Just be careful not to get any inside your phone!If none of these work for your particular situation, consult an expert before proceeding further. What Screw Do You Need to Unscrew the Screws on the Iphone 11? A P2 pentalobe screwdriver is a specialized tool that is used to remove or tighten screws with a pentagonal head. First, let’s take a look at the two different types of screws that are used on the bottom of the iPhone. The first type is called a Torx screw. These screws have a star-shaped head and they’re usually used for electronic devices. Goldberg, Andrew. "Installing iPhone 5 Battery". Repair Guide. ifixit.com . Retrieved January 28, 2012.

The MacBook Air has seen more extensive use of pentalobe screws than the MacBook Pro. All five versions of the 11-inch MacBook Air ( late-2010, mid-2011, mid-2012, mid-2013 and early-2014) include eight 2.5mm-long and two 8mm-long external pentalobe screws. [7] The last five versions of the 13-inch MacBook Air (late-2010, mid-2011, mid-2012, mid-2013 and early-2014) use eight 2.6mm-long and two 9mm-long pentalobe screws. [8] Pentalobe screws have been used only externally on MacBook Air models.As a result, they can be more difficult to remove without the proper tools. A P2 pentalobe screwdriver has a small, pointed tip that fits into the pentagon-shaped opening in the head of the screw. With a few simple household items, you can easily unscrew those pesky screws without a screwdriver. You will need a Pentalobe (five-pointed star) screwdriver to remove the two screws on each side of the Lightning connector.