youyeetoo NanoPi R5S Mini Router with Metal Case,4GB LPDDR4 16GB EMMC, RK3568 Development Board 0.8TOPS NPU Support Docker Three Ethernet Ports USB3.0 HDMI Support M.2 NVMe PD Power (Power Bundle)

Product Information

Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. In general I’m also curious whether R5S can be powered by a dumb 5V power source or a USB PD capable charger is needed. Not if the disk is the bottleneck or inappropriate settings like (missing) Samba tunables or (missing) IRQ/SMP affinity settings. All those RK3568 sbc-bench results that flew in with missing cpufreq support clock the cores at ~815 MHz (no idea which u-boot version these tests relied on but I’ve a few results also with horribly low memory performance).

On the "Interface Configuration" page you can set the WiFi mode and SSID, and then go to "Wireless Security" to change the password. It used to make sense at an era where application servers would assign heavy request processing to the core that accepted the connection. When dealing with wall outlet (high) voltages you should satisfy yourself that whatever you are doing is safe and if unsure, seek advice from someone who is sure. likely not the fault of this unit – I think I just picked a bad source for graphical desktop interface? You could establish another subnet via DHCP on your NanoPi, then it would be the gateway of the connected clients.This article is a quick first impression review, but everything we tested with the NanoPi R5S worked well for us. gz” found on Google Drive, flashed it to a microSD card with USBImager, and booted it to the router. Since then, the range has received a few upgrades — the most recent being the NanoPi R4S, a dual-gigabit design with a Rockchip RK3399 six-core CPU. The system performs at its maximum advertised frequency during the test, and I don’t any obvious bottleneck shere.

Here in Spain I’m using 4G for broadband and have a 4G router (TP-link MR600V3) feeding my main router (GL-iNet FLINT) which unfortunately has only one WAN input. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. The router comes fully assembled together with a 3M sheet with 6 rubber feet, which, as we’ll see below, are not really necessary.

That’s another method to flash the NanoPi R5S eMMC flash memory, but in most everyday situations, the SD Card method using the eFlasher tool works just as well and is more user-friendly. The router can also be found on Aliexpress from several sellers, some of which also sell a 4GB RAM version, which is odd since FriendlyElec only sells the model with 2GB RAM at this time. OK More information about cookies rockchip rk3568b2 4core armv8 microsd emmc 4096ram 3port gigabitethernet 2nic 3usb usb2.

interfaces don’t work optimally with iperf3, I did not bother testing the router performance in FriendlyWrt, but several people still asked.We recommend improving software support from additional Linux distributions such as OPNsense, including adding an ubuntu/Debian desktop image. This R5S unit has sat around for some time doing nothing – until today when my friend Antonio (who lives in Italy) and I flashed the latest OpenWrt from FA onto the EMMC from FA’s SD image and after some work which I’ll detail later (default user root, default password password), turned LAN2 into a second WAN. I can see the Apacer AS2280P4 SSD is detected, and it turns out it’s not formatted out of the box, so I just formatted it with mkfs. Still needs to be tested but I got the hint from sbc-bench who built their image under the same parameters. With mature software a powersaving mode should have increased performance where the (current) performance mode is a practical limit.

When the software I run (mostly helt back by OMV) gets bookworm support I see no reason to keep the Debian 11 with (6. Measuring iperf from/tothe device is not really a good benchmark for a router as tools like iperf also would put a load on the system. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

The f3 bench mark is to be considered a similar to real-life benchmark, because the CPU needs to perform calculations while writting and reading the data. I could rant on for hours about the possibilities but I prefer to talk about stuff I’ve actually tested and right now that includes getting the basic OpenWrt running along with LUCI, SSH….