AN-10 10AN AN10 90 Degree Reusable Swivel Fitting Hose End Grade A Black

Product Information

Originally parts were made compliant to the specification MIL-F-5509, but they are now controlled under SAE AS (Aerospace Standards) specifications AS4841 through AS4843 and AS4875.

SAE fittings are commonly used in traditional automotive applications, such as in brake and fuel systems. They can also be found in older vehicles and in some industrial applications that do not require the high performance capabilities of AN fittings. Today, AN fittings are widely used in various industries and applications, including automotive and aerospace. Understanding AN Fitting Sizes SAE fittings are typically made of steel and have a 45-degree flare, making them well-suited for use in systems that don’t experience high levels of stress or pressure. AN Fittings vs SAE Fittings: Key Differences These classes offer a thread fit that creates a balance between performance, manufacturing, economy, and convenience. It is the most commonly used class as 90% of all commercial and industrial fasteners use it. SAE J514/ISO 8434-2 fittings are produced to this class. What does a Class 3A and 3B thread fit mean?

Aeroquip are one of the biggest suppliers of these type of fittings to the motorsport industry. They are sold by quite a few people. Think Automotive in London sell the majority of the Aeroquip range. These types of fittings are commonly made of steel and have a 45-degree flare, which helps to create a leak-free seal when used with a hose that has a matching 45-degree flare. These fittings are commonly used in traditional automotive applications, such as in brake and fuel systems, where they provide a reliable and secure connection. Originally, everybody had their own system for hydraulic couplings, a lot were similar, but not compatible with each other causing confusion and a parts nightmare. So finally the military got involved and created the AN (Army-Navy) connector standard. The AN standard defines tight tolerances and defines every type of fitting (and adaptor) available. One of the most important aspects of AN fittings is understanding the sizing. AN fittings are available in a range of sizes, each with a unique designation. The size of an AN fitting is indicated by two numbers separated by a dash, such as “AN6” or “AN8.” The first number refers to the size of the fitting, while the second number refers to the thread size. AN fittings and SAE fittings are two commonly used types of fittings in the automotive industry. Understanding the difference between the two is important when it comes to selecting the right fitting for your needs. AN Fittings

On AN 37° flare fittings, both male and female fittings are made according to class 3A/3B UNJ/UNJF radiused root threads. J screw threads have a root radius that improves the tensile stress area of the fastener while reducing the stress concentration in the thread. This makes the thread stronger and offers the benefit of tighter tolerances and better fatigue life for aircraft, aerospace, and military applications. In this article, we’ll discuss the history, sizes, types, and applications of AN fittings, as well as provide a guide on how to choose the right fittings for your needs.When choosing AN fittings for your application, there are several factors to consider, including: Hose Size

Each dash size corresponds to a progressively larger diameter, measured in sixteenths of an inch. “ -1” is 1/16", “ -2” is 2/16", and so on. In this case, -6 hose would indicate a hose with an inside diameter of 6/16”, or 3/8". AN stands for Air Force – Navy Aeronautical Design Standards, and it is used for fittings. Can I combine AN and JIC couplings? The line drawings below depict the actual sizes of the various common types of fittings, hose ends and adapters. The number is SAE spanner size equivalent. Then JIC (The Joint Industry Council) came along and use the AN standard as a basis for their own standard. They essentially just ratified the parts to reduce the part count. The tolerances allowed are more lenient for JIC fittings too, compared to AN fittings. SAE/ISO 37° fittings conform to the United States Department of Defense MIL-F-18866 and SAE J514/ ISO 8434-2AN fittings are essential components in various industries, especially in automotive and aerospace. They are designed to provide flexible, leak-free connections, and are available in a range of sizes and designs. For example, an “AN6″ fitting has a nominal size of 6/16″ and a thread size of 3/8”-24. On the other hand, an “AN8″ fitting has a nominal size of 8/16″ and a thread size of 7/16”-20. The line drawings below depict the actual sizes of the various common AN/ORB thread sizes. If you are unsure as to what size fitting you have lay your fitting over the appropriate drawing to determine its size. NOTE: - AN and ORB thread are the same diameter. AN seals with the flare, ORB seals with an O-ring.

Many brands offer AN fittings, and it’s important to choose a reputable brand that offers high-quality products. Reputable brands are more likely to offer fittings that meet your specific requirements and are designed to last. N fittings are typically made of lightweight aluminum and have a 37-degree flare, making them suitable for use in high-stress and high-pressure systems. They can be found in fuel, oil, and cooling systems, as well as in turbocharger and nitrous oxide systems. AN fittings are also commonly used in custom automotive builds and modifications, where the builder or racer wants to create a unique and high-performance system. AN fittings are made of high-quality materials, such as aluminum or stainless steel, which makes them highly durable and resistant to wear and tear. This is particularly important in applications where the fittings will be exposed to harsh conditions, such as high pressures, temperatures, and chemicals. How are AN fittings installed? AN fittings are commonly used in high performance and racing applications where the need for high flow and leak-free connections is critical. They are also used in aircraft, military/tactical, and industrial applications where lightweight and high-pressure fittings are required. A

Understanding AN Fitting Sizes

By understanding the history of AN fittings, their sizes, types, and applications, and choosing the right fittings for your specific needs, you can ensure that your system runs smoothly and safely.