Makita DC18RC 14.4 - 18 V Li-ion Fast Battery Charger Black

Product Information

The DC18RC is a compact size fast charger which charges Makita batteries from 14.4v to 18v. Only 22 minutes to fully charge a 3.0Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger and battery. The internal cooling fan keeps the battery temperature low for minimum charging time. BL1830B 3.0Ah Lithium-ion Batteries If there are no lightsshowing on your Makita charger it is not receiving power. When the Makita charger is plugged in and receiving power, a single green light will start to flash. This signals that a battery is ready to be inserted. A solid green light means the battery is fully charged. Solid Green Light Means Battery is 100% Charged Warning Lights

A single Flashing green light means that the charger is in standby mode. It is connected to an AC power supply and is ready to start chargingyour batteries. Where uninterrupted run time is critical, such as on remote construction locations or where charging capacity is distant and would mean valuable time lost away from the operating point, extended run time is all important. The Makita BL1850B 5.0Ah 18v Li-ion battery provides 66% more run time than that of the 3.0Ah battery whilst maintaining the same size and weight so maintaining the excellent balance and comfort of a Makita tool in use. Fast charging - charges a Makstar 18v LXT Li-Ion 3.0Ah battery in only 22 minutes / 5.0Ah in 45 minutes

After charging or before attempting any maintenance or cleaning, unplug the charger from the power source. Pull by plug rather than cord whenever disconnecting charger. Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries.

If the Yellow light does not flash, it could indicate that it is “ conditionally charging” the battery. The battery can be charged in spite of the yellow warning light. But the charging time will be longer than usual in this case. The re-charging time of such battery may be longer than usual as the battery may have continued to discharge in spite of low power. The Makita DC18RC 240V 18V LXT Battery Charger is the ideal product for tradespeople and DIY enthusiasts that use Makita cordless power tools. You rely on your tools to get the job done, and it is vital that your batteries are not only fully charged, but also operating at their best. The DC18RC will do just that. It can charge a 3Ah battery in just 22 minutes and the digital charging display will allow you to easily monitor the progress of charging. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.

Product Overview

To keep your batteries running at their best, the DC18RC has a forced cooling system to prevent overheating which will give your batteries a longer service life. Sold as a single unit. As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated. Makita BL1850B 18v 5Ah Li-ion battery is compatible with 18v tools if they have a star on the connector plate or has a yellow connector plate Makita “STAR” battery and drill protection Alternate Red and Green lights flashing on Makita Charger DC18RC The followings show the symbols used for the equipment. Be sure that you understand their meaning before use.