DSLRKIT Active PoE Splitter 48V to 5V 5.2V 2.4A USB TYPE A Female 802.3af for tablet

Product Information

Hello, please does this POE splitter ( WT-AF-5V-USB ) also work with passive poe? We wanto to use POE pannel but we don't know if it will work. Micro-USB Ethernet Adapter Mode: Connect an Ethernet cable with a network connection to the PoE/Ethernet IN port of this adapter, and then connect Micro-USB Out to your device. The adapter will not feed power but will deliver Ethernet to your device, which should have been powered with another power supply. Microchip Technology Inc.has introduced a power over Ethernet (PoE) to USB-C adapter, solving the issue of limited USB cable length and the need for a nearby power outlet. The PoE to USB-C adapter, PD-USB-DP60, connects IoT devices with a USB-C connector over PoE, leveraging the benefits of both PoE and USB-C technologies. I tested the device on a Dell XPS 15 7590 laptop running Debian with the KDE Plasma desktop. The screenshots show that the Microchip device provides both power and network connectivity. For a PoE to USB-C solution with power + data, please see our GAT-USBC-PD or GAT- USBC-PD-REV2. The Rev2 is compatible with the iPad Pro Gen3, Microsoft Surface Go, Samsung Galaxy Tab Active, and Google Pixel phones. Our Rev1 will work with Microsoft Surface Go and Samsung Galaxy Tab Active.

I also tested the Microchip device on an HP ENVY laptop running Windows 10. For reference, the HP laptop comes with a 65W power supply. As with the Dell running Windows 10, although the green LED on the USB-C cable lit up (indicating a power connection), the laptop stayed on battery power. The Microchip PoE to USB-C® adapter connects IoT devices with a USB-C connector to Power over Ethernet (PoE) networks, enabling users to leverage theadvantages of PoE and USB-C technologies. The PD-USB-DP60 is a PoE to USB-C adapter that provides both power and datato USB-C hosts and power to USB-C Powered Yes, this splitter will work with 802.3af passive PoE. This splitter requires an input voltage of 44-56 volts, so it is not compatible with 24V passive PoE. In addition, it enables the use of PoE in applications not previously possible thanks to the capability of converting 90-W input to 60-W output. The adapter can be paired with Microchip’s single-port and multi-port (up to 24) PoE injectors/midspans and switches that comply with IEEE 802.3af/at/bt industry standards and provide up to 90-W power per port. If a lower power is needed to power the USB-C device, IEEE802.3af (15.4 W) or IEEE802.3at (30 W) PoE sources can be used, said Microchip. The GAT-USBC splitter is active/802.3at, so it will require power from a POE source to pass data through. Data is then "split" on to the female RJ45 output, not the USB-C connection.In May 2020, I Roadtested a Raspberry Pi PoE HAT and, in the process, explained a bit about the benefits and applications of PoE. Sorry, we don't have a splitter that will pass through PoE. However, if you can handle a data rate of 100 Mbps, which is still screaming, and you want a 5 volt splitter and a second PoE line, I recommend our WT-MMF-RJ45 kit. It allows you to combine two 10/100 PoE signals on one Ethernet cable and split it out on the other end. The only thing you need to make sure is that you have PoE and data on the Mode A wires. What's Mode A? - Read this blog. We do not sell a USB to Ethernet adapter. You may reference our blog about Apple iPad PoE with Wired Ethernet Data - Updated!

Because I didn't have an actual "kiosk PC" available to test, nor an IEEE 802.3bt switch or PoE injector, I decided to make a miniature kiosk computer by adding a Pimoroni Hyperpixel touchscreen to the Raspberry Pi 4. The photo shows "eth1:" connected to my 802.3at switch.

PoE to USB-C Power and Data Adapter

The PD-USB-DP60 adapter enables flexible installation of USB-C devices, removes the need for a close power outlet and resolves the issue of limitedUSB cable length. The PoE source can be up to 328 ft/100m from the location of the USB-C device. A single Ethernet cable is needed while delivering up to60W of USB power at the output of the adapter. It depends on your end device and the power requirements. The older 802.3af Cisco PoE switches are capable of 15 watts, and some USBC devices require 20V 1 Amp, other USBC devices that are 15V 1 Amp could work. Feel free to send us the make and model of the USBC device you are powering and we will be happy to verify for you. The marketing materials for the Microchip PoE to USB-C Power and Data Adapter suggest very clearly that it is intended to allow a "kiosk PC" to be operated from a single PoE-enabled network cable. By "kiosk PC", I think they mean the sort of small, low-powered PC, such as an Intel NUC that is used in information kiosks (often with a touch-screen) in public places. Normally those devices would need a power connection and also a network or Internet connection. Long network cables are relatively low-cost and would allow the kisok PC to be up to 100m or 328ft from the network switch. In contrast, USB-C cables can only be a few (<4) metres in length if used to transmit data, so the Microchip PoE to USB-C Power and Data Adapter would allow such a kiosk to be installed in relatively remote locations where there is no easy access to mains power. No, the output female RJ45 port only provides data out, not power. Power is only provided on the female USB-C output. Yes, using the GAT-USBC splitter with your Netgear GS305P will work to provide the required 5 volts, 9 watts to your Google Wifi.

The Raspberry Pi Foundation released a second version of the Pi 4 ("Rev 1.2") which fixed the problem. To find out if your Raspberry Pi 4 is Rev 1.2 or later (and will therefore work with the Microchip PoE-USB-C adapter), load the Terminal and type " cat /proc/cpuinfo". Press Enter and at the bottom of the screen it will show your Raspberry Pi model details including Revision number. Does this device also act as an USB-Network-Interface so the device can be supplied with power _and_ network data over USB-C? If not, do you offer a version which does? If you need a PoE adapter for a Raspberry Pi 4 (Rev 1.2 or later), the Microchip PoE to USB-C Power and Data Adapter will work, but it is more expensive and takes up more space than other options and, due to the limitations of the Raspberry Pi 4's USB-OTG controller, is limited to a maximum of 480Mb/s, compared to Gigabit speed available if you use the official Raspberry Pi PoE HAT.Does the RJ45 output also have POE power? I'm looking to power both a Nest IQ and a smaller POE camera at the same time. Yes, you can use this USB-C splitter to power the new Nestcam indoor and outdoor units. For more information, see our blog on USB-C. The CG-POE-CESBT is intended for indoor environments, designed to be powered from an IEEE802.3bt PoE switch or PoE injector (not included). Supports up to 100m distance from a PoE switch or injector to Type-C converter wired over Cat5/5e/6 cable. Enclosed in a compact, IP40 high-impact metal case, the CG-POE-CESBT is easy to pair with your devices.