BPS Access Solutions Slider 3 Section Sliding Loft Ladder With 2 Handrails

Product Information

The ladder features a metal handrail and includes a pole for pulling the ladder down. It has wide, deep wooden treads, making it comfortable for climbing up and down, and they’re also non-slip, making it safe to use. It is possible for one person to install the loft ladder, although time and effort are reduced if 2 people carry out the task. The instruction leaflet could be clearer; we find that following YouTube installation videos clarify each step much better than written directions. The mounting kit is supplied, open the box and start the job. The BPS loft ladders are very strong and durable. The large aluminium treads are capable of withstanding 150kg weight, that is equivalent 23.5-stones. Ladders also come with different materials. Wood, for example, is the cheapest material available, and stable material for your loft access. The downside to this is, of course, the fact that it’s also the most affected by the environment. Without proper maintenance, it can degrade or even worse, become infested. Compare this to the much more durable steel, and you can see why some may choose to spend the extra money for longevity.

This convenient ladder is a perfect choice for awkwardly located doors or loft areas with limited space. With an aperture width of 45cm, this ladder will work in practically any space that you can fit your shoulders through, and it arrives fully assembled, so all you have to do is fit it on the door. Telescopic loft ladders: This is technically a type of sliding ladder but designed to be a bit more streamlined and easy to use. They also tend to take up much less space as they’re constructed more compactly.

Ladders

Key specs – Max load: 150kg; Max floor-to-floor height: 2.61m; Material: Aluminium; Handrail: No; Hatch: No; Pole: No Installing a sliding loft ladder is a two person job so you will need a competent person to help you to install it – one person working in the loft and the other at ground level. Folding Loft Ladders – Folding Loft Ladders are similar to Sliding Loft Ladders, the only difference being that the former is attached to the hatch itself. This means that whilst folded, the ladder rests directly on the hatch. This is perfect if your loft is not large and you need all the space you can get. Always use your slider loft ladder in accordance to the manufacturers instructions and additionally, follow the instructions given on the side of the slider loft ladder. Only proceed to install the sliding loft ladder if you feel confident in doing so. Remember to work tidily and keep tools and parts away from the loft hatch where they could drop or on the floor area where the could be a tripping hazard.

So, we see that the two main factors for how much a loft ladder will cost you are the type of ladder, and whether or not a new hatch will be required. It’s important to also understand that some hatches may not be compatible with your chosen ladder. Can you install a loft ladder yourself?Cut your hole– Use your cutting tool to create the opening. Make sure there are no electric cords where you are cutting by using the stud detector. Protective gear may be a good idea to keep yourself from getting hurt. It’s important to understand that by making modifications to the ladder and especially hatches, you are affecting the insulation of your loft. Poor insulation leads to energy loss, leading to increased energy costs. The hatch, being an opening, is the place where most energy will seep through. Place the catch lever (no. 2) onto the pivot pin (as shown) and secure using the second nut (1). Again ensure the pivot pin twists freely. Enclosed catch system provides hatch with a streamlined finish and looks smarter than ugly protruding hooks

Ensure the overhang beyond supports is equal and less than a third of the full length of the ladder A loft ladder is a safe and space-saving way to access your attic. Unlike the old-school (and rather dangerous) technique of leaning a standalone ladder against the opening, modern loft ladders are sturdy and secure. When fully extended it has 10-steps and reaches 2.9m; folded to its shortest it stands at just 74cm tall. Key specs – Max load: 150kg; Max floor-to-floor height: 2.85m (extension kits available for up to 3.5m); Material: Timber; Handrail: Yes; Hatch: Yes; Pole: Yes There is also the matter of ladder variety. There are different types of ladders, with different functions and capabilities. The differences between them will be explained later in this article. Additionally, the distance from your hatch to the floor is also factored into the overall price.Galvanized steel framework makes up the hatch so it is incredibly strong with most loft ladder frames on the market being made from just wood. Choose the most comfortable gradient for you and rest the ladder there. If the ladder seems too long it is simple to undo and remove 1 of the 10 steps. Wooden Handrail is included free of charge for added safety and reassurance when in use – other loft ladders on the market do not have this vital safety aspect included for free or at all! Installation is best with 2-people, one to bear the weight as the other aligns the fittings and attaches them. The instructions are in English but, as seems to be the problem with all of our featured loft ladders, they aren’t very clear.

Needless to say, all of this is highly work intensive, and tradesmen usually have an assistant with them to help them with the installation. So, if you want to DIY a Loft Hatch to save costs, you will require not only intermediate carpentry skills, but you will need a second person to help you. Unlike similar models, it is pre-attached to a loft hatch. The user needs to replace the existing door with the new one by following the instructions and guidance videos.Durability - wooden loft ladders are highly durable and long-lasting, meaning it is extremely unlikely that they will break, even with frequent use and heavy loads being carried. The ladder is double spring-loaded, this supports its weight as it is lowered and raised. A handy rod is included to pull the steps down; the extra hook is an alternative option, it has to be securely screwed into the tip of the rod. Insert the pivot pin (no. 5) through the outside of the hatch through the hole and secure using the second nut (1). Ensure the pivot pin can twist freely.