Joined in 2023 
82 
63 About this deal
The front of the P600S comes with two pre-installed premium 140mm fans but does have room for a third. This also gives you the option to install up to a 420mm radiator in the front of the case. Both side panels are completely tool-free and secure to the case with four strong magnets. A nice touch with said magnets is the use of a thin rubber layer on top of each meaning the panels close with a satisfying dull noise rather than a clatter. These side panels make everything from building to upgrading very easy and as previously mentioned, it is my go-to choice for side panel design. The magnetic panel has three different configurations which include fully closed, slightly open, and totally removed. Leaving the panel fully attached to the case should provide near silent operation. The other configurations are designed for higher airflow while sacrificing some of the soundproofing that it provides. Buyer's Remorse - Authorization to return the unit must be made within 30 days from receipt of product. At the bottom, we have one of the best PSU shrouds going, it’s solid metal and ties in with the overall color scheme nicely. There is a little bit of branding that looks superb towards the font of the shroud and there is a cutout where the PSU sits to cater for those of you that are going to be grabbing a model with a display or RGB lighting.
As previously mentioned, the front is where we see the I/O, which are hidden by a flip-down panel to keep the overall aesthetics consistent. The reality is that you will likely flip this up and leave it for life but it does look cool.The Phanteks Eclipse P600S has many cooling options, with support for up to 420 mm radiators in the front, 360 mm on the top, and a 140 mm radiator in the rear. Dust filters have been installed on the front, on the top, and at the bottom. The Dutch manufacturer provides users with three Phanteks Premium 140 mm fans. Overall, the Phanteks Eclipse P600s is one of the best cases on the market. While I still lean towards the Corsair 5000-series, Phanteks are still high up on my list. The P600s excels in thermal performance when configured correctly and the option to have my system as a stealthy silent beast is one I favor. The left side has 2 useable cable channels which are held in place with double looped Velcro strips. Opening the box reveals an accessory kit that Phanteks is known to include in their higher-end chassis.
While the P600S supports dual systems, you'll need a few extra components to do this, as they're not included in the box. To start with, the second system is limited to mini-ITX motherboards, with Phanteks offering an ITX upgrade kit that includes a motherboard mount that sits in the roof of of the case and sports its own power button. You'll also need Phanteks' 90cm riser cable extender, which will allow you to mount a discrete GPU for the second system vertically on the PSU cover - not needed if you intend to have a low-power second system with no discrete GPU, but the manual covers this upgrade in a decent amount of detail. Specifications If you choose to remove the panel, the inside filter is made of a fabric mesh rather than the normal metal mesh seen in other cases. This fabric mesh is designed to give you better cooling performance as it is much less restrictive providing upwards of 90% airflow.
Going to the bottom of the case, it includes four rubberized feet with a removable PSU intake filter. The top of the case features another removable center panel just like the front and also comes with sound dampening materials. The removable top is part of their dual-mode design, meaning when things get too hot or if you install a radiator, you can get the airflow you need. I really can’t say enough about the Eclipse P600S, and regardless of the type of build you’re doing, the P600S has something to offer. Phanteks feature their double strap cable management system, a set of simple velcro straps strategically placed to make cable managing your PC extremely easy. The straps and clasps can all be removed with a screwdriver meaning you can do more elaborate management if you need. The PSU also sports a removable dust filter of its own that pulls out easily from the rear, and the case is raised a couple of centimetres using rubber-bottomed feet. The 52cm depth and 51cm height plus CPU and GPU limits are identical or close to it compared to the Evolv X, with the main difference, apart from the odd design tweak, being the use of steel rather than aluminium, adding a couple of kilograms to the weight.
Related:
Great Deal 
New Comment