Polar Acid Etch Primer Solution - 5 Litres - For Preparing Concrete & Stone Floors - Interior & Exterior Use - Etches Alkaline Surface Providing Key Prior To Painting - Cleans Dirt, Oil & Stains

Product Information

Specially designed for adding a finishing touch to garden patios. Works perfectly on concrete, stone flags and patio paving slabs. The ideal solution for decorating patios, driveways and garden pathways. Our 5 Litre tin covers 55m. We have your patio covered, no matter the size. ENVIRONMENTALLY FRIENDLY: Polar Concrete Stain is a solvent free solution that's gentle on the environment, as well as on your pets and children. It's formulated with non-toxic chemicals, yet still provides a durable, weather-resistant, and smooth matt finish It is also possible for residues to leech out of the moulding and /or paint to leech into the moulding. EASY TO APPLY - For optimal results - apply Polar Etch Primer prior to application. Ensure the patio surface is washed and dry before applying. Dry and warm conditions are advised. Apply 2-3 coats, depending on the surface area. Fully dry and weather resistant in 3-4 hours. SLIP & STAIN RESISTANT: Polar Concrete Stain provides a non-slip surface, making it ideal for areas prone to wetness or dampness. Our Concrete Stain protects against oil and fuel spills, weathering, fungus and weeds.

ENVIRONMENTALLY FRIENDLY - Water based paint solution that’s as friendly on the environment as it is on your pets and children. Formulated with non-toxic chemicals, yet still provides a durable, weather resistant, smooth finish.If Stainless Steel has already been used, the only advise we can offer is the roughing up of the surface with 600-800 grade paper, cleaning the surface with PQ17 and then applying the topcoat directly to the metal. Whilst this is not ideal it is the only way for the amateur. All Etch Primers need to be left for a minimum of 24 hours at a temperature of 18 - 20 degrees Celsius to dry properly. UV / WEATHER RESISTANT - Paint formulated to protect underlying stone and concrete from harmful radiation effects and long-term staining. Polar Patio Paint gives durable resistance against harsh weathering from rain, sleet, snow and wind.

Like all types of galvanised materials zintec has been designed to resist rusting and by default it also resists acids, hence etch primers do not work on it. Whilst this allows for complex parts to be moulded it can leave a surface that is 'slippery' and does not accept paint. This is achieved by combining an acid with the paint so that the acid microscopically etches the surface of the substrate, thus forming a physical and chemical bond between the two. Wait for the first coat to dry for about three minutes before repeating for a second coat. You may also want to do a third coat when the second coat dries if you think this is necessary. EASY APPLICATION - For optimal results, prepare the surface by cleaning and ensuring it's dry. Apply Polar Etch Primer prior to staining. Dry and warm conditions are recommended. Apply 1-2 coats, depending on surface area. The stain will dry and become weather-resistant in 3-4 hours.Etch Primers are for the most part designed to work with either ferrous or non ferrous metals or in some cases both. More paint finishes are ruined by the application of paint over Etch Primer that is still drying than almost anything else. ENVIRONMENTALLY FRIENDLY - Water-based paint solution that’s as friendly to the environment as it is on your pets and children. Formulated with non-toxic chemicals, yet still provides a durable, weather-resistant, smooth finish.