EASYSEAL Sandstone Seal+ENHAN 5LT

Product Information

Before using this product, it is recommended to use A/C EasyDry if moisture is present in the system. Treat any efflorescence or staining before application, allow a few weeks before applying EASYseal BCS to ensure efflorescence doesn’t reappear

Bedding Mortars We supply a range of fast set, cement & resin based bedding mortars which are ideal for installing manhole covers, utility access covers, frames, highways ironwork and the bonding of granite, sandstone & porphyry setts, paving slabs, flags and bedding kerbs. Our range of high strength, bedding mortars mean roads, footpaths & highways can be reopened to traffic in as little as 40 minutes, meaning less disruption for the general public. Attach other end of charging hose to low side service port. As this is done, there will be a very small release of system charge that will purge air from the hose. upper surface has a non-removable polyethylene film, with a removable release film to the underside. Both the capsheet and underlay have specially formulated self-adhesive additives in the coating. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging.

EASYSeal BCS can be applied to a variety of concrete paving materials on driveways, paths, walkways and patios. Features & Benefits Please note: Natural stone varies in levels of porosity, therefore on more porous stone or uneven surfaces the coverage will be less and more product will be required. For less porous stone, such as slate and limestone use our EASYSeal Slate and Limestone sealer and enhancer. EASYSeal Sandstone Sealer & Enhancer is for more porous natural stone. Apply two coats, if using a brush or roller, apply the second coat by brushing or rolling at right-angles to the previous coat at a rate of 4 – 6m2 per litre. Apply the second coat between 3 and 24 hours after the first coat is touch dry Located in the North East of England, Easyseal UK are a well established company providing effective solutions to all your industrial roofing & wall-cladding problems, plus asbestos roof renovation. Approved contractors for numerous manufacturers of liquid coating and single ply membrane waterproof systems, Easyseal have carried out projects across the entire United Kingdom. Services we provide include:

Run system continuously for a minimum of 1 hour to allow product to fully circulate through system.

Sorry

Apply EASY Seal BCS with a brush, roller or low pressure sprayer at a rate of 3m2 per litre for the first coat Welcome to Bradfords Building Supplies – your trusted local trade Builders Merchant since 1770, providing building supplies throughout the South West; Wiltshire, Somerset, Dorset, Devon, Cornwall and even into Hertfordshire and Worcestershire! At Bradfords, we have over 250 years of industry experience, providing high quality Landscaping, Kitchens and Bathrooms, Plumbing and Heating, Tools and Workwear, Tool hire, Timber and general building materials to skilled builders, DIY and home owners within our communities. Manufactured from a polyester base with an SBS (Styrene Butadiene Styrene) bitumen coating, this Easyseal roofing top sheet also features an upper surface with a special finishing of slate mineral. The release film protects the underneath of the sheet and can easily be removed with ease when installing to BS 8217: 2005, 'Code of Practice for Reinforced bitumen membranes for roofing' and IKO fixing guidelines. Features & Benefits: IKO Easyseal / Coldseal Self-Adhesive Top Sheet Roofing Felt - 6m x 1m Incredibly easy to apply to your roof, the installation process can be carried out by DIY enthusiasts and professional builders alike This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent

For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating. Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair.

Fantastically versatile vapour control layer that can be used as part of a complete Easyseal system, or alternatively a torch-on or even single ply roof build. This vapour control layer has been designed for use on habitable buildings, meaning it is compatible with structures that see a lot of residential use. This product is ideal for use on a range of different flat roof projects, with porches, garages and extensions just some of the structures this roof can be used on effectively. The self-adhesive properties eliminate the need for gas torches and hot works, hot bitumen, and any other messy sealants that CAN make installations irritable and time-consuming. A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil.