ELMconfig USB device 500kbit/s ELM327 compatible interface with MS-CAN switch for Forscan FoCCCus OBD2 diagnostics …

Product Information

You cannot read and erase error codes with this software. It does mostly same stuff as ELMconfig but has a different selection of vehicles. Do not use this software if you are not sure what you are doing.

Solder pin 6 (which you just de-soldered) to the middle pin on your switch (middle bottom in diagram) This update will automatically switch on the rear (and front if fitted) heated screen(s) when the engine is running and the temperature drops below 3°C. While the Car Scanner ELM ODB2 is still in Beta version as I speak, it managed to work very well in our Windows laptop and smartphone. We were able to diagnose the OBD2 fault codes and read the sensor data in our fleet of test vehicles without encountering unusual errors. Please FIRST move the unextracted folder to your Desktop, else below #2 step won't show "Install" option.I'm trying to enable cruise control on my Focus Mk2.5 1.6 TDCi, and am getting extremely slow speeds doing the initial step of "Read firmware from PCM to BIN-file". NOTE: Before using your Vgate vLinker FS for the first time with FORScan, you must install the latest FTDI Virtual COM Port Drivers and update the adapter firmware to the latest version. Ensure you update using a computer with a reliable power source. FTDI Virtual COM Port Driver Installation (vLinker firmware files v2.2.86): I have a Ford Focus MK2 2.0 l petrol car. I tried for curiosity to write the odometer on my car, I was able to increase the km value, but not to decrease it from the “odometer write” menu. Than I tried to use the menu under IC programming, called “write odometer value in km” or so. As I wrote the former value from this menu, the decreasing also didn’t succeeded, but many problems came instead of.

love the post about follow the instructions to the letter. I have NEVER seen a complete set of instructions... that's the whole problem. Delay time for “Theatre”/Courtesy (interior) lighting fade from/to (0.01-2.55 sec) – Make the fade longer or shorter This update will show the radio or CD information in the instrument cluster display. This will only work on vehicles with the large displays. For example it will work on the display shown in this sections header image.ELMConfig is a piece of software written by Russian enthusiast Sergey, known as civil-zz. It started life with an application called FF2, which allowed you to alter modules in a, surprisingly, Ford Focus Mk2. ELMConfig was written along-side, but soon did everything FF2 did and more. FF2 was retired, ELMConfig took over, was enhanced, and added functionality to work with more versions of modules. The software was then translated into English. You can thank Sergey for his hard work by making a donationto him. Basics I'm hoping to avoid spending a heap of money on a battery charger that I'm only going to use to keep the battery going while enabling cruise control. I am, after all, trying to get away with doing this cheaply. 😉

bug: VIN wasn't read from factory AB file when loading it in some versions of the Central Configuration function The GEM Tab or (BCM) , This will not connect , and i'm Guessing that it needs the Wiring MOD before it can connect to the High CAN BUS.

Best ELM327 Software for Windows Smartphones

Here are a set of instructions that I wrote for someone else (possibly @wilto )that was having difficulty with the PCM: Module Initialization" sub-function of service function BCM/BdyCM "PATS Programming" (experimental!) for: you shouldn't attempt any of this this without some form of electrical support... (reading about voltage stabilisers yesterday and they are saying up to 120 amps these days), I guess that means you never need to worry if you left the on the lights, fan or radio during a 3 hr programming session De-solder pin 14 from the OBD port (Make sure you label this wire if you have not used colour cable)

So on Low Canbus i can goto some settings and onHigh Canbus i can goto the rest of the settings although i'm not sure what some of it is. This is the main screen of ELMConfig – Along the left hand side is the main module navigation, with the Low CAN & High CAN modules. Below this, you can read the fault codes within each module, and also clear the codes to prevent the warning lights showing.

FORScan Lite for Android - attention: some functions are missing in FORScan Lite. Please see comparison of applications If you want to configure modules,many of the BT units will fail and refuse without OBD2 adapter to progarm them. You can save the Changed AS-BUILT information if you like and also save the connection log file if you like. I've explicitly set the adapter to use 500,000bps in ELMConfig, and it confirms that setting in the window titlebar. The FoCCCus software is originally developed for the Focus MK3. The original developer of the FoCCCus software stopped developing the software any further about 3 Years ago.