Joined in 2023 
82 
63 About this deal
Solo live streaming solution supports one touch integration with Facebook Live, YouTube and other popular social platforms Reliable Transport When your modems, or your modems, Wi-Fi and LAN, are setup this way, you may get some or all of these behaviors: Select Disable and press the Center ( OK) button to disable the interface. The Disable button of the interface changes to Enable, indicating that the interface is currently disabled.
If you ever have any doubt about what exact settings to change, once you find them, grab a screen shot and open a support case with LiveU and we will assist you. Change The Third Number To Something Other Than 1, 8 or 10These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! Conflicts H.265 HEVC / H264 high-profile video encoder, 4Kp60/50/25/30/24, 1080p50/60/25/30/24, 1080i50/60, 720p50/60, PAL, NTSC at up to 20,000Kbps.
While each device is a little different, here are general steps that are applicable to all devices to help guide you. Get To The Settings For Your Device Plugging one unit into the same network via more than one means (LAN and WIFi)? Always going to be a problem. So now you have a short history of how this became a growing issue and why these devices operate this way. Let's, finally, take a look at the actual math of a conflict, as it makes it easier to spot when you know how it mathematically works.
Reliable Transport
When moving from the Home screen to the Main screen, the Interfaces option is initially selected, as shown above. The selected option is highlighted in gray on the screen.
Her are some example conflicts, with each line in the example below suppose to represent 1 of 2 modems or other connections: 192.168.8.100Conflicts can happen this way too. What if the WiF I join happens to use the 192.168.8.0/255.255.255.0 subnet? Just as above, we are now in conflict. Connect two cellular modems with Wi-Fi and LAN and we will bond them together to create a single fat connection for all your needs. OVP/CDN Integration Save your settings in the modem, router or MiFis interface, and it will likely need to reboot for those settings to take effect. The WiFi client interface shows the selected WiFi network SSID, RSSI signal strength bars and the uplink bandwidth (in Kbps) currently being used. You can enable or disable one (or even all) of the LiveU Solo interfaces. Each interface must be enabled/disabled separately. The examples below describe how to enable/disable cellular modem interfaces. These procedures are the same for all interface types (cellular modems, WiFi and LAN interfaces).
Great Deal 
New Comment