Ronseal 10 Year Woodstain Teak 2.5L

Product Information

The main reason for this is that teak wood is known to be highly durable and resistant to water. Most untreated woods will soon rot if it absorbs too much moisture, and the color will soon fade if it is exposed to consistent sunlight. But teak wood is naturally water-resistant and requires minimal upkeep ! Don’t use a power sander for this step because we need a smooth and flatten the raised grain caused by the sealer. This step in our can you stain teak wood guide is staining the teak wood. Oil-based colors are often recommended for teak wood furniture. The reason for it is that since teakwood naturally has oil on its surface, oil-based paints would be a good option.

Furthermore, staining teak wood can help protect the surface from harsh elements. Teak, especially outdoor furniture and boat, is often exposed to dirt, moisture, wind, and UV rays. These elements can fade the natural tone of teak wood, which results in dingy gray color. Plus, the air pollution and pollen from nearby plants can clog up the pores of the teak and cause the colors to fade. A wood stain can restore the natural beauty of the teak while acting like a protective layer. Buy our Tester Kit that includes 9 colours of Wood Stain that we do(15ml Tester Pots in Slate, Warm Graphite or Grey are not included in the Tester Kit). However, it is always dependent on the type and quality of the stain used. The application process can also affect the stain’s longevity. All over the world, teak is used for building window panes, outdoor furniture, chairs, tables and so much more. Apply additional coats of stain, allowing each coat to dry in between, to achieve a deeper color. Usually, 2-3 coats are enough.Solid color and semitransparent stains let some of the natural wood grain pattern through for a more natural-looking result. Since these stains have a thinner base, it needs to be redone every 2 to 5 years in most cases. Should You Oil Teak Outdoor Furniture? Finally, this best stain for teak wood offers four colors to meet your personal preferences. Feel free to choose from red mahogany, cherry, early American, and golden oak. Put furniture pads or glides under the legs to protect both the furniture and the surface it sits on. Pine & Softwoods – Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained. If you don't have a conditioner, you should wipe the wood down with a wet cloth so the wood becomes damp. After the wood dries, sand it smooth using a #100 Fine Sanding Pad - this process helps reduce the uneven absorbtion of stain often found in softwoods. Similarly, if you want an even darker shade, this second layer should be added on top of the first coat.

After staining wood, you should finish the job by sealing the stain in with one of our Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss. Wood Stain Options Regardless of the tool you use, make sure to apply an even coat over the entire surface. If you want to protect areas you do not intend to stain on the furniture or flooring, be sure to cover and tape them with a material the stain cannot penetrate like plastic sheeting. Wait for the Stain to Dry After this, use the 220-grit sandpaper over the teak furniture again. You need to prepare the surface so that it can absorb the stains. There are various types of teak wood, and the origin of the wood can influence its natural color and characteristics. Consider the type of teak you’re using and how staining might affect it. Desired Appearance A. We recommend leaving the stain to soak into the wood for one or two minutes before wiping the excess off. This will prevent the stain from staining the wood too dark; you can then apply a second application of Wood Stain if you want to darken the wood further.Apply the stain in the direction of the wood grain with an applicator such as a foam brush, natural bristle brush, rag, or pad.

Remember, after the first coat, if you want a dark shade, you should wipe the wood with the first coat of wood stain after a long time. Once you apply a coat, wipe off the excess with a clean piece of cloth. Make sure you don’t leave small puddles or pools of sealant on the wood. This will make the surface have bubbles here and there. Teak stains come in a variety of shades and colors, allowing you to personalize the appearance of your teak wood furniture.

Similar products

In all instances, ensure the surface is clean and any saw dust or dirt has been removed before applying the Wood Stain. Applying Wood Stain Unfortunately, many businesses offering fence and wood painting services do not hire staff with much experience. If they do not use the right type of stain or apply it as directed, the results will be quite unsatisfactory.

The same instructions below apply for both interior and exterior wood, but if you are staining wood to be used outside, you’re best using our Exterior Wood Stain. Applying Teak Wood Stain Multiple steps may be needed. Therefore, it requires more effort and time than single-step procedures. Usually, most homeowners will only consider staining a teak fence once it starts to look noticeably faded and used after years of exposure to the outdoors. But if you wait too long to stain your teak wood, it may not do much good. The grey faded tone results from evaporated oil caused by exposure to UV rays. This means that the wood is less moisture-resistant and weaker. In this blog, we will discuss the benefits of Wood Stain and show you how to colour wood using our Teak Wood Stain. The benefits of using Teak Wood Stain Our Wood Cleaner is water-based and so totally safe to use on all types of wooden surfaces. It is suitable for gently cleaning wooden surfaces to maintain a clean appearance but can also be used with the Sanding Pad to thoroughly clean deeply ingrained dirt and stains.Before you stain your teak furniture, you have to sand and smooth out the wood first. Take a dry paper towel and brush off any dirt, dust, or debris. If some spots are a little harder to remove, use a wet rag to rub the area clean. Any grease, dust, or dirt left on the surface of your wood will cause the stain to not properly adhere. Avoid any use of cleaning products. It will make staining more difficult and also potentially damage your wood. Wood stains have been designed to completely soak into the wood, stain it to your desired color, and bring out the beauty of the natural grain in the timber. Did you know fact about staining Teak wood Benefits of Staining Teak Wood You can use water-based or gel stain too, but you must seal the surface with sanding sealer. An over-absorption of water-based wood stain or gel stain will damage the Teak wood or ruin the finish. Allow the stained surface to completely dry, which should take several hours or as directed on the product label.