Worcester Bosch Internal Filling Key To Repressurise Combi Boiler

Product Information

In most cases, fixing the underlying problems will require the assistance of a Gas Safe registered engineer. How do I reset my Worcester boiler?

You can fill in Heatable’s 90-second anonymous questionnaire to get a range of fixed-price quotes on a range of regular, system, and combi boilers from various manufacturers. Heatable also offer flexible finance options with all new boiler models. What’s Next? There are plenty of reasons a Worcester boiler (or any boiler, really) may not fire up, but most have to do either with gas supply, ignition, or an inability to operate safely. For Worcester Bosch boilers, the typical operating water pressure should be in the 1.5-2 bar range. When the Pressure Is Too Low The boiler pressure rises when the heating is on, so you will not get the proper reading until it has cooled down. You’ll have to find out why the boiler pressure is low in the first place. In most cases, it’s because of a leaky central heating component, so you’ll have to locate the leak and repair it before topping up the boiler.With most Worcester Bosch boiler models, resetting the boiler is as easy as pressing and holding the reset button for about 3-5 seconds. The button is typically located on the boiler control panel. A keyhole for a plastic key with a white square knob to turn: This knob will need turning like a tap to open and close. Heatable is a great place to start getting your quotes. They install Worcester Bosch boilers at highly competitive prices, thanks to their online business model and low overheads. According to Worcester Bosch themselves, the ideal boiler pressure for a system that’s off is between 1-1.5 bar. If you find that this light isn’t working properly — and neither is the boiler — it could be due to these root causes:

As in the above section, make sure to completely switch off your boiler at least four hours before you start work to give it sufficient time to cool down Keep in mind that your warranty will be valid provided that you keep up with your annual maintenance after installation. Not providing the yearly service might dissolve the warranty.

Also, bleeding your radiators can sometimes cause a loss of boiler pressure, so you should repressurise it each time after you bleed your radiators. How to repressurise your Worcester boiler In other cases, the boiler’s pressure gauge may be displaying incorrect pressure readings, leading you to believe that the pressure is lower than it is. In this scenario, you’ll have to attach the hose to the two valves — the one that connects to the heating system and the one from the mains water. Next, you’d open the mains tap, then the heating system tap, and wait for the pressure to climb to the correct level. You can then turn off the taps and remove the hose. Pressure Gauge Fault It could be that there is a build-up of limescale or debris in the heat exchanger. You may also be faced with a faulty thermostat. How long does it take to fit a new boiler? Now, keep in mind that these units will slowly lose pressure over time. However, if it happens all of a sudden, then you are having a problem.