Chrome Bath Waste with Overflow & Chrome Pop Up Waste

Product Information

Take your drain fitting and thread it through the tailpiece of the drain arm, which you will then be able to tighten with your wrench. Your helper will need to hold the drain arm in place. Once you’re sure it’s all there, start on your new system by connecting your plastic pipe to your new bath wastes at both ends. Now it’s time to prepare your bath for its new waste and overflow components. At this point, it’s worth test-fitting the items and cutting the kit to size if it doesn’t fit perfectly. It’s best to do this before securing everything in place and realising you have to remove or redo it. Your bathtub’s plug isn’t the only place that has screws to remove – your waste overflow pipe will too. Twist off the plate on top, remove any screws and pull the cover plate off. With that gone, you can start taking out your overflow pipe, which runs from your bottom plug up to the overflow behind the bath. If you’re plumbing in a new bath, you will eventually come to fit the bath waste. Or, if your old bath waste has corrosion or is leaking or damaged, you may find yourself in a situation where you need to replace it.

Fitting a bath waste trap is a fiddly job that usually requires you to replace the entire bath waste assembly. To do this, follow our above step-by-step guide or call in a professional. How do you fit a bath waste? It’s time to connect the drain fitting. To do so, apply some plumber’s gold to the rim (flange) of the drain opening in your tub. Then, from underneath the tub, place the rubber washer around the drain tailpiece before slipping the tailpiece through the opening. Top Tip: Occasionally, you might find your waste pipes have been glued or soldered in, so they might need to be sawed free from the bath instead.

The first thing you need to do is get access to your existing tub. This job is much easier for baths you haven’t yet installed. So, depending on the type of tub and fittings you have, this will either be a simple or difficult step. For example, freestanding tubs or those with slip fittings will make your life easier. At Build & Plumb, we aim to supply you with the knowledge and information to succeed at DIY and plumbing in your home. Why not browse our collection of waste fittings online today? With the right plumbing tools, you can complete any plumbing job in your home. Related blogs The bath waste is the component that drains the water from your bath to the wastewater pipe going to the outside drain. Top tip: As you tighten these components, the plumber’s gold will ooze out around the flange. Simply wipe the excess with a wonder wipe.

If you have a bath waste ready, lay out all the pieces from the box, ensuring you have all the necessary components and read the manufacturer’s instructions carefully. Step 3: Attach the overflow pipe and waste Yes. However, some plumbers prefer to use plumber’s gold. Using sealant with washers, rubber seals, and nuts ensures there won’t be any water leaks. Are all bath waste holes the same size?Locate the overflow rose and bath waste cover and attach them on the front of the bath to the bath waste using a screw and screwdriver.

Note: Slip fittings make this step infinitely easier as you only need to tighten everything to secure it together. How to fit a flexible bath waste pipe Depending on the complexity of the components, what access you have to your bath, and the type of bath waste you’re installing, you can either follow our step-by-step guide or hire one of our plumbing experts to help you. Are bath wastes a standard size? Hopefully, you have another person helping you at this point. If so, ask them to help you line up the overflow tube with the overflow opening on your bath. You also need to make sure the horizontal drain arm lines up with the drain opening on the bottom of your tub. Once you do, find the single screw in the centre of your waste cover and use your screwdriver to unscrew it. That should mean you can now remove the outer bath waste from the bath.If your bath has an overflow, then you want to make sure that the waste you choose has a built in overflow. This way, your waste, plug and overflow will all be coordinated, giving your bathroom a more finished and sophisticated look.

Ready to get started? Our step-by-step guide will help you remove your old bath waste and get your new one installed in no time. Top tip: Make sure your replacement bath waste fittings closely match your existing ones. How to fit a bath pop up waste and overflow

How to fit a freestanding bath waste

The best place to start is to remove your drain fitting from the bottom of your bathtub. There are a few different styles of fittings, so you may need to unscrew your drain cover before you get to it.