Quad Lock USB Weatherproof Wireless Charging Head, for Quad Lock Motorcycle Mounts, for Quad Lock 360

Product Information

I’d recommend having the USB head connected to an outlet that’s disconnected when the bike’s turned off (or go for the hard-wired version). The wireless head does ‘remember’ its last state when powering up, so you could leave it turned on and ready to charge if you have a switched auxiliary supply. Is it more of a problem with some devices than others due to the construction of the OIS? If so, what is the difference in the devices? Once the mount is attached to the bike, removing the lever mechanism allows fitment of the wireless charging head, which you then wire up to the bike’s battery so it can charge your phone. Some manufacturers have implemented their own Proprietary Extended Power Profile (PEPP) for their devices. This means unless you are using a charger specifically designed to support PEPP, you are limited to the Base Power Profile of 5W wireless charging. A: Wireless charging is only 70-80% efficient so the additional 20-30% of energy is converted into heat. In normal conditions, this is not usually a problem, however, using the wireless charger in your car in direct sunlight can compound the issue and cause some phones to overheat.

A: The charging head fits all our motorbike mounts and mounts which feature our index connecting feature such as the Out Front Mount Pro. iPhones: 14 Pro Max, 14 Pro, 14 Plus, 14, 13 Pro, 13 Pro Max, 13, 13 mini, SE (3rd and 2nd Gen), 12 Pro, 12 Pro Max, 12, 12 mini Q: What's the difference between Weatherproof Wireless Charging head and the standard Wireless Charging Head? I used a 1” ball mount to attach mine to my Honda CB750 Hornet’s handlebar clamp bolts, via an Ultimate Addons ball adapter and an extender arm. Different phone manufacturers also implement different approaches to manage the charge rate in the aim to protect the phone's battery.Exposing your iPhone to high amplitude vibrations within certain frequency ranges, specifically those generated by high-power motorcycle engines, can degrade the performance of the camera system.” For this test, I used the handlebar mount. Installation, including the vibration mount and the wireless charging head, is a breeze. It took me less than 10 minutes to mount the whole setup. Easy. An average motorcycle battery this will take about 1 month to drain at 12mA or 2 months at 6mA. We recommend disconnecting the charger from the battery if your bike is parked and not started for prolonged periods.

I never tested the charger from 0 percent phone charge, but it took less than an hour to charge my Samsung S10+ from 65 to 100 percent. If this happens, remove your phone from the charger and allow it to cool before continuing to charge. If possible, positioning the phone/charger near an A/C vent can help keep the phone and charger cool.This is an issue with the Google phone, rather than the case, and it does seem to need a lot of power to wirelessly charge effectively. These issues seem to be predominantly with iPhones, and when I spoke to SP Connect, they confirmed that the vast majority of problems they’d come across were with Apple devices, and of these they were mainly the iPhone X, 11 and 12 series, but not the 12 Pro Max, which has Sensor-Shift OIS. They told me that issues with the iPhone 13 are very rare, with none reported on the 14, both of which use Sensor-Shift. They also pointed out that unlike on Apple devices, the OIS on Samsung is deactivated when the camera’s not being used. A: Fast Wireless charging is slower than an equivalent wired charger of the same wattage. This is because wireless charging is only 70-80% efficient meaning 20-30% of the power is lost during the wireless transmission process. We have an in-depth support article around expected wireless charging speeds which can be found here.

Designed to fix in place of the screws that hold the lid on many motorcycle and scooter brake / clutch reservoirs, this mount is a very clever design that opens up even more options.Mous has also developed a range of motorcycle mounts to suit its cases, though options are rather limited for now, and prices seem to be on the high side. With the wireless charging head fitted, your phone starts charging after you start the engine. A small light on the charge head indicates the charging condition. If it’s solid bright blue there’s power available but no phone connected. Attach your phone and the light should go solid green to show it’s charging. Once the phone is fully charged, the light turns solid pale blue.