AEROS Loop Studio by Singular Sound

Product Information

I am currently using this to control the Voicelive 3, POD HD, Ableton live, Kaoss Pad 2, and an EhX ModRex. This is a powerful unit. The displays are nice and visible on stage, though the ability to dim the brightness a bit would be awesome. Added Line-in impedance setting. Sets the input sensitivity: Instrument level (1M Ohms impedance) vs Line level (50k Ohms impedance) Instrument level is about 10% more sensitive than Line level.

When this setting is on, the Aeros action button will say “Arm” instead of “Record” when stopped. This works for overdubbing from a stopped state too. Press the button to Arm the Aeros and play to begin recording/overdubbing. Some loopers out there, like the Aeros and Pigtronix Infinity Looper Pedal offer unique effects that can add creativity to your sonic arrangements. bit floating point processing, 24-bit recording, professional DACs, <1ms latency, and 20hz – 20kHz range for studio quality recordingsWhen using CC:113 MIDI command and the Auto Song Part Change (6x6) setting is on, the Aeros will no longer start a recording in the upcoming part automatically when switching parts

In addition to a USB interface, there is also Wi-Fi and Bluetooth . Apart from updates , the exact functions are not yet described.https://forum.singularsound.com/t/aeros-firmware-2-12-2-beta-freeform/16341?fbclid=IwAR2l9J8F8T4tb5k2vY-6j_nHQKq8LmpuvwdgbMwKOdg5OcauXZP-Vy-0eW8 here is the picture of the message that appears on the screen. So I repeated the operation several times respecting this message. Without success. While multiselect mode is enabled, you can tap the Middle Aeros button to Move a song or multiple songs. If you hold down the Middle Aeros button, the song(s) will copy. Two 1/4″ (6.35 mm) inputs, two 1/4″ (6.35 mm) outputs, one 1/4″ (6.35 mm) stereo aux input, one 1/4″ (6.35 mm) stereo aux output.

Gearnews readers should have met the company through Beat Buddy . At the time, it was the most funded musical accessory in crowdfunding history. Now Singular Sound wants to shake up the market of Looper with the Aeros Loop Studio. Added 0.5 second forgiveness lag for End of Measure commands: Now if you miss the end of measure by 0.5 seconds or less when recording or changing song parts, Aeros will behave as if you triggered the command on the End of Measure that you missed. This allows you to trigger commands on the End of Measure line, without having to worry that you'll miss it. The Loop decay will only engage when a new overdub layer is started, the loop decay does not apply at every loop seam.

I know what you're thinking. Loopers are a little pricy to just use for practice. Don't worry, we'll discuss plenty more than that. However, practice and tinkering with your instrument is the lifeblood of creativity, songwriting, and amazing live performance. Changed the active song part to have a blue square around it: Previously, the currently playing song part was missing a blue square while the non-playing song parts all had blue squares around them. This new design is easier to see.