Drayton DIGISTAT +2 22084 24 Hour PROGRAMMABLE Room Thermostat

Product Information

Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat? The Drayton Digistat+2RF is a thermostat that is designed to control the heating and cooling systems in your home. This thermostat offers convenient wireless control, allowing you to adjust the temperature from anywhere in your home. It is compatible with most brands of boilers, making it a versatile option for any household. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).

In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature. When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency.

Digistat+2

This range of valves and actuators are now obsolete. Your only option is to drain down the system and fit ZA 5/6 zone valve.

What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement? The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body. These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVsNo, E1 is an error code that means the internal sensor has failed. The sender unit will have to be replaced. The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. We manufacture two different types of sensor kits. One is described as a remote sensor and the other as a setting kit. Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? A room thermostat controls the heating in your home. If the room's temperature drops below your chosen temperature, the thermostat will switch on. Once the room has reached the chosen temperature, the thermostat will turn the heating off, preventing overheating and reducing energy consumption. This can help reduce your home's energy consumption.