Varilight Intermediate Push-On/Off Switch Module (Dummy Dimmer Light Switch) 6A (1 Grid Space) White GPINTW

Product Information

Pattress – This is the box that contains the parts of the light switch. Make sure that you get the right size face plate to fit on the pattress that you have fitted An intermediate switch can be used as a one way or two way switch (but is more expensive, so would not normally be used for this). As we are dealing with electricity it is obligatory that we warn you about safety. We have a great project that helps you understand what you are allowed to do, what you cannot do and what are your obligations under the Building Regulations (Part P); Find out more about the electrical do’s and don’ts here.

If you're planning to change or add switches throughout a home, it's worth thinking ahead about how many switches you need to ensure you get the right amount. Go from room to room and count how many lights need to be controlled. Then work out if any of these can be combined on a 2-gang, 3-gang or 4-gang switch and whether, in some cases, you need to control one light with multiple switches. Dimmer switches are ideal for rooms where people want to relax in softer light, such as living rooms and bedrooms. So, consider if a dimmer switch is needed. If so, ensure the light bulb used in the connected fitting is compatible with a dimmer switch. If not, simply change the light bulb. Gangs and ways are the terms used to describe light switch connections. They tell you how many light fittings the switch can control and how many other switches control the same light. Here’s an explanation. With these two products, you have the flexibility to install intermediate and 2-way switches that look like dimmers. Only one of these switches can be a dimmer but you can use VARILIGHT touch and remote dimmers, White plastic switches are often the default switch people go for but consider if other colours and finishes would suit the décor better. For example, brushed or polished chrome or slate grey are perfect finishes to match contemporary décor. Or if the décor is more traditional, there’s antique brass or wood effects. Also, think about how the colours will complement or match other items in the room, such as appliances, door handles or window openings. And don’t forget, you can choose different colours and finishes for different rooms if necessary.If we want to change an existing switch, then note down the position of the terminals as well as the position and connections of the cable. This is the uPVC sheath containing the electrical wires, Live, Neutral and Earth. Previously the sheath was made of rubber and these cable should be changed by a qualified electrician – find one near you here. Live

The light point can be controlled from three locations with the help of 2 two-way switches as well as an intermediate switch. In addition, the lamp in a multistory building on the ground floor otherwise in car parking shadow can be controlled from any floor through an intermediate switch. The end two light switches need to be two way light switches. All the other switches (in between) need to be intermediate light switches. The Hierarchy of Switches This will either sit inside the wall, in the plaster or cut into the plaster board, or be mounted on top of the surface of the wall. Plastic tends to be used if the pattress is surface-mounted and metal when it is incorporated in the wall.There are many types of light switches available. Some only control a single light, while others can have multiple switches to control multiple lights from one place.