Tamiya Acrylic Mini XF-1 Flat Black

Product Information

Keep in mind that this is a very improvised comparison, but all comments and criticism are welcome. Mix: 5pts XF61 + 2pts XF62 + 2pts XF3. This is fraction darker than the standard so a wee touch more XF3 won't hurt. Then allow for scale effect. Mix: 5pts XF2 + 5pts XF15 + 1 pt XF52. Be careful with XF52 as too much will turn your resulting colour too mauve. Desert Pink needs of a definite pale pink appearance. The mix may benefit from a touch more white. This was the colour specified in MTP 20 for use in scheme 1 for 'average European conditions'. This colour is matched to the colour that I use over Khaki Green 3 and which is based on the use of complimentary hues and low contrast values seen on numerous contemporary photographs and what few colour photographs exist for 1940 period vehicles.

This mix is between my book sample and SCC 5, the best that I could manage easily but since it was a theatre colour then there must have been some variations. I found this on HMS Cornwall for anyone that might have the Kit, and who might be interested in painting her in an unusual colour, I found the attachment below, they have Cornwall in her launch/trial colour and then further colours, which I'm now considering I just realized I have a bottle of GSI's Mr Color 361 RAF Dark Green (WW2) number from their RAF Color Set 2. I'll add a swatch of that one tomorrow when I have some time. I also have some related Humbrol enamel swatches I can throw in as well (and no, Humbrol 30 Dark Green is not close at all. Oddly, it still looks good when used on early-war RAF fighters though. But maybe it's just me).In the 1980's, U.S. military developed new general-purpose vehicles which were intended to be used for a wide variety of military duties. Depending on the body type and fitted equipment, it could perform a wide range of roles. Of those different variants, the armament carrier type was one of the most numerous. Fitted with powerful armament such as an Mk.19 grenade launcher and M60 machine gun on a ring mount, they are used to guard units and important facilities in difficult conditions including the 1991 Gulf War, being vital for U.S. military activities. The kit features detailed suspension and realistic rubber tires. ?Included are a driver and gunner figures as well as 4 kinds of markings to depict a vehicle seen during the Gulf War. The resulting colour is slightly less rich than a sample matched to an original motorcycle part and slightly less brown than on a steel helmet in original colour, so a good average. The China Stations scheme is a much-repeated myth. It was white hull and Foreign Stations Grey (Admiralty Pattern 507C upperworks), not white and buff.

The same issue confuses the Ceylon scheme below it. Admiralty Pattern 507B formula was not in use by 1942, but it makes no difference to a colour profile as 507A and 507B were exactly the same colour.At last the final colour for Caunter. Specified as the darkest colour to be used on vehicles painted with the Caunter scheme. Came into use in 1940 and apparently retained as one of the alternative colours to be used with the 1942 patterns.

The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish. What matters most to me with paint is performance, first and foremost in the airbrush. I don't shop around for paint - I buy it where I find it. Just what the new Bronco kit owners need. Khaki Green 3 was the new basic colour from mid-1939 till phased out in 1941. But also may be used as an alternative colour in lieu of Slate 34 in the Caunter scheme. Mix: - 3 pts XF62 + 2 pts XF59.The Indian Ocean scheme is generally correct, and names the correct paints but due to the legacy of people confusing paint recipes with paint colours and assuming 507A and 507B were different colours (they were most certainly not!), the depiction on the Indian Ocean scheme of the darker grey is a very dark.

This is the colour that replaced SCC 2 brown as the basic colour from April 1944 on for use in NWE and Italy to avoid the need to repaint US equipment. But NOT Bailey Bridges, these remained SCC 2 brown. We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen. Not bad, imho. Certainly much closer than the others. The XF61 is much darker than the XF81, but still has a yellow-green (ie: "olive") cast to it, so it darkens the mixture enough without drastically altering the hue or chroma. Used in India and Burma on British and Commonwealth vehicles from about late 1942 - 1945 so your Chinese & Indian Sherman Vs and M3 Lees can be real dull now, as can many softskins too. It would have helped. Mix 2 pts XF51 + 1 pt XF61 + 1 pt XF3.Use enough pressure to allow your airbrush to atomise it properly. That may not be the same as what someone else recommends, but your 20psi is a long away from what I use.