ANSIO Dehumidifier 500ml Pack of 5 Condensation Remover Moisture Absorber Dehumidifiers for Damp, Mould, Moisture in Home, Kitchen, Wardrobe, Bedroom, Caravan, Office, Garage, Bathroom, Basement

Product Information

Try washing musty smelling soft furnishings in the washing machine with some white vinegar added to the usual detergent A conventional extractor fan that you might find in a bathroom or kitchen is an effective way of removing humid air from a building to reduce the condensation that causes damp; however, an extractor fan simply removes air,' says an EnviroVent spokesperson. Double glazing can’t eliminate condensation entirely, so following a combined approach of windows, ventilation and reduced moisture is the only way to completely get rid of condensation.

A dehumidifier is an air conditioning unit that removes humidity from the air to prevent the build-up of condensation and damp. As with everything, prevention is easier than working out how to get rid of damp. 'Once damp starts, it can sometimes be difficult to remedy the issues it causes, such as mould growth and structural damage', says Ian Henderson, Managing Director, Boiler Plan. A desiccant dehumidifier extracts water from the air using an absorbent material. The material is heated to turn the moist air into water, which then drips into a water tank. This type of dehumidifier is best suited to cold, unheated rooms. We’re the UK’s number one in removing condensation from inside windows. That’s why we are nationwide.You may find that having your heating on a constant low heat is better for damp (and for your air temperature) than having it frequently swing between hot and cold.

You’ll also find that condensation on exterior windows is more likely to affect single-glazed windows than double-glazed ones. This is because double-glazed windows have an air gap between the two panes of glass, which act as a thermal barrier against the cold from outside. This means the inside windowpane stays closer to the indoor temperature. So, when warm air indoors touches the windowpane, it doesn’t reach its dew point. Heating and insulationThe frequent rises and drops in temperature caused by central heating being switched on and off contribute to condensation forming. This is further exacerbated in a home with poor insulation because the temperature difference is more dramatic. Also, the colder a surface is, the more likely it is that condensation will form on it. Improving insulation adds overall warmth to a home and prevents extreme temperature changes. It also helps to keep surfaces warmer. So, cavity wall insulation, for example, stops cold spots on walls. And loft insulation prevents the ceiling from being cold. If you're looking to reduce condensation and damp in your home, our best dehumidifiers can help. What causes condensation? Contents in a home left empty for long periods can easily be damaged if they absorb and hold excess moisture from the air. The same applies to properties that feel permanently damp, due to their location, (perhaps built against the side of a hill) or age. Fitting roof ventilation tiles and/or ventilated soffits (under the roof and guttering) to allow air through the loft

Your bathrooms and kitchen are responsible for most of the moisture in your home. If you don't have an extractor fan in your bathroom, you should consider having one installed and making use of it each time you shower or bathe. Be sure to have a bathroom extractor fan fitted to help clear the excess moisture in the room. This is even more important if you don't have a window in the bathroom. Brighten up grey days with a polka-dot begonia that combines dual-tone leaves with sparkling silver spots If extractor fans aren't cutting it, the next thing to consider is a dehumidifier, which will draw moisture out of the air. These can be particularly useful if you often dry clothes inside the house – another common source of excess humidity. There are different types and brands available, so read up on how to buy the best dehumidifier to find one that does the job. Condensation is one of the most common causes of damp in a home. But it’s not the only cause. Damp can also be caused by structural problems such as penetrating rain on an exposed wall, failed damp-proof course, overflowing gutters, a leaking roof, and plumbing problems.

Being warmer, it is suddenly capable of taking up some of the extra humidity from inside your house. Kenwood PLC are here to help with simple, high-quality condensation control systems to help you maintain better ventilation within the home. How Does Condensation Control Work? We have a wide range of solutions from humidity controlled extractors, single room heat recovery and whole house ventilation systems. Our engineers will supply and install the systems which are completely automated and require no control from the occupants of the property, ensuring correct ventilation as required. Inhaling or touching mould spores can often lead to reactions including a runny nose, sneezing, red eyes and skin itching.The main concern from standing water and moisture is mould. If left untreated mould will damage and discolour uPVC and wood. The unit is very quiet and will be minimally disruptive, it is also a robust and reliable way of integrating condensation control into your home.