Makita DHP486Z 18V Li-ion LXT Brushless Combi Drill - Batteries and Charger Not Included

Product Information

Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model Specifications such as Impacts Per Minute and No-Load Speed remain equal to those of the DHP481, with a max of 31,500 ipm and a No Load max speed of 2,100 rpm. Some users don’t appreciate an RPM over 2,000, as when using larger drill bits, the drill struggles. With a max RPM of 2,100 on the highest setting, the option of a lower gear and thus a lower RPM of up to 550 rotations per minute is welcome. Users have regularly favoured higher RPMs over the years, possibly for no other reason than that they look good on paper! A brushless electronic motor runs more efficiently than brushed types. This can help reduce the tool's energy consumption.

While the new DHP486 combi hammer drill does look similar to the original DHP481, Makita has confirmed that it is the most robust drill in its class, thanks to the 130 Nm of torque it offers from its brushless motor. This allows the tightening of heavy-duty fasteners, for example, a 9 x 50mm lag bolt in screwdriver mode. Makita DHP486Z 18V Brushless Combi Drill LXT Bare Unit The Makita DHP486Z 18V Brushless Combi Drill LXT Bare Unit has mechanical 2-speed control and a variable speed trigger with an electric brake. It also offers users both forward and reverse rotation, with an LED job light to illuminate workpieces and improve precision. The most compact drill in its class with a 178 mm head length for comfortable handling in tight spacesSpeed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.

Product dimensions are stated with a battery / batteries, if they affect the overall dimensions of the product. Home/ Shop/ Power Tools/ Cordless Power Tools/ Cordless Combi Drills/MAKITA DHP486Z 18V LXT Brushless Heavy Duty Combi Drill MAKITA DHP486Z 18V LXT Brushless Heavy Duty Combi Drill All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.

Offering a versatile specter of appliances, the tools are equally preferred by DIY enthusiasts and professionals around the globe. Variable speed control by trigger allows you to adjust the speed to suit the application and material The LED light still remains in its original place – above the trigger, with twin LED’s as well as a handy after-glow function. The separate mode select collar has been eliminated to achieve a shorter length. While some people do prefer different mode select collars, the trend seems to be to remove this for the sake of a shorter drill.

Ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold The Brand New Makita DHP486 is Makita’s flagship 18V Combi Drill replacing the DHP481z. Powered by an LXT Brushless motor which also has mechanical 2-speed control and a variable speed trigger with an electric brake. It also offers users both forward and reverse rotation, with an LED job light to illuminate workpieces and improve precision. The gearbox construction is all metal, and housed in metal gear housing. Features: Makita DHP486Z 18V Heavy-duty Brushless Combi Drill with Variable Speed & Electric Brake (Body Only)Drilling Modes: Screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 40Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 13mm hole diameter Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life Newly-designed motor and gear ratio achieves more power and increases performance in continuous heavy-duty applications The overall length has been decreased by 27mm compared to the previous generation for better handling and control.Screwdriving mode (rotation with clutch) is one of the three drilling modes that can be used to drive screws with an even, uniform finish. Drilling mode (just rotation) provides 130Nm of maximum torque. The hammer drilling mode allows for holes of up to 16mm in diameter to be drilled in masonry.The high-lumen twin LED job light with pre-glow and after-glow provides a clear and reliable light source for the work area.

DHP486Z 1/2" Cordless Hammer-Drill/Driver with Brushless Motor Up to 1,155 in. lbs. Max Fastening Torque! The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. Support: If you require support from any of our customer service teams, please call 1 800 663-0909(Western Canada), 1 800 263-3734(Eastern Canada & Prairies) or send us a message here If you’re concerned about sound, this device produces 84 dB(A) at sound pressure level and 94 dB(A) at sound power level. The noise k factor is 3dB(A). All of which is a slight improvement versus its predecessor. DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. DHP486Z Features:Another reason users will love this new model is that it’s approximately 14% smaller than the DHP481. Measuring just 178 x 81 x 248mm, it’s more likely to fit into compact spaces, thanks to the optimised gear assembly design. Impacts Per Minute and No-Load Speed High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.