Joined in 2023 
82 
63 About this deal
These often only could handle 30 to 40 watts which is fine for all LED vehicles but as soon as you put a trailer on it would blow or the user would fit the relay with bulbs and blow the LED Flasher Relay. Or would I have to wire pin 86 to green and pin 85 to light green and brown, so across the flasher relay?
So people fitted load resistors to imitate the load of the incandescent bulbs they have just removed, resulting in more wiring, things that get hot, melt anything near them and the best bit you are using more power than a standard bulb set up! Are there different types of LED flashers? Yes, because life is complicated. There are generally 2 types of LED flashers: Solid State and Relay. A solid state flasher has no moving parts. The finaly switching element inside a solid-state flasher is a semiconductor power transistor. In a relay-based flasher, the final switching element is an electromechanical relay. Solid State vs. Relay Type If your LED bulb goes out, you can simply go into any auto parts store and get a standard (non-LED) replacement bulb to get you going "legit" without burning up your flasher. Compatibility: All LED flashers from CEC, including the Solid State flashers, are compatible for use with regular bulbs as well as LED bulbs or a mix of LED / regular bulbs. There are many cheap LED flashers on the market that will simply go up in smoke when you put regular bulbs in. You may think that's not important, since you have LED bulbs in your car, but think about it:Thermal flashers require that your bulbs consume a minimum amount of load, usually 15 Watts or more, to function properly. Electronic-with-lamp-out flashers require a certain amount of power usage by the bulbs. If it's too low, they will flash fast (by design) to let the driver know that one of the bulbs has burnt out. That is known as the lamp-out warning. Not all electronic flashers have this feature. The RDX 4 Pin Flasher Relay blows others in to the weeds, why as ours is tuneable this means it can be adjusted to suit your vehicle by simply turning the adjustment knob on top of the RDX 4 Pin Flasher Relay. Reliability: We sell flashers from CEC industries, they have been around since 1959 and their flashers are extremely well built and reliable. Some have tried to create a 4 Pin Flasher Relay but they state it might put the trailer light on when you are not pulling a trailer plus it can only handle 10 watts ours can handle 150 watts. A Standard Flasher Relay works on load, this means it is designed to see 21 watts bulbs, when you fit LED lamps or bulbs the Relay can not detect the load as the LED lamp/LED bulb may only use 2 to 3 watts, resulting in fast flashing which is no good to anyone.
If you have LED bulbs only in the rear (or only in the front) our LED flashers will work with a mix of incandescent and regular bulbs
Brands
LED lighting draws much less power (load) and lasts way longer than standard incandescent lighting. Replacement of indicator bulbs with LED’s will cause the indicators to flash too fast. This happens because your new LED lights draw such little power. Installing an LED flasher relay specifically designed for LED lights is the easiest method to solve this problem. What about load resistors? In the true sprit of fixing things that aren’t broke. I’ve recently switched my 382 indicator bulbs to leds, unfortunately even though I’d previously fitted electronic flasher relays for both the indicators and hazards nether worked (hyper flashing) with the lower current draw from the leds (Was kind of expecting it to be honest). I have a 1996 CB500 twin cylinder (N reg) Ihave bought a set of LED Indicators and they now all flash together (all four at the same time). What do I need to get them to behaveproperly? May 28, 2012 I have a suzuki bandit 600 2003. Would the replacement relay still have all of the other functions that oem relay has (i.e. side stand ,hazards warning lighs)thanks. October 8, 2011
Why does my existing electronic flasher not work with LEDs? For flashers, electronic only means that the flasher's internal timing (on-time vs. off-time) is electronically controlled, vs. thermal flashers that use a bi-metal strip. Electronic timing control means that the flash speed is constant regardless of the load (or two-speed for electronic flashers with lamp-out warning circuits). The LED indicator relay replaces the original (OEM) indicator relay on your bike. Therefore you should require oneunit.RDX 4 Pin Flasher Relay can handle bulbs, LEDs and a mixture of both on the vehicle it does not care it just gets on with the job! I have just replaced the 4 standard indicators on my 04 Suzuki GSF 600 Bandit with LED type and now they flash considerably faster. Will this product sort out the problem and if so do I just need one unit? Also I notice from a review that they just plug into a standard Suzuki unit as a directreplacement?
Great Deal 
New Comment